User manual

Preparing for use
Charging the device
You have to charge the BlueTouch Pain Relief
Patch before rst use. You also have to charge the
device when its battery is low. When you charge
the BlueTouch Pain Relief Patch, it takes less than
5 hours to charge the battery. When fully charged,
the battery contains enough energy for 4 or more
treatments. You can charge the BlueTouch Pain Relief
Patch with the adapter and USB cable supplied.
Note: You cannot use the BlueTouch Pain Relief Patch
when it is charging.
Note: If the device is not fully charged when you start
a treatment, the battery may run out during the
treatment. We advise you to always fully charge the
device before you start a treatment.
1 Insert the standard USB plug into the socket
of the adapter.
2 Insert the adapter into a wall socket
(100V-240V).
3 Insert the micro USB plug into the socket on
the BlueTouch Pain Relief Patch.
Caution: Only use this micro-USB socket to connect
the BlueTouch Pain Relief Patch to the mains for
charging. Do not connect any other cable with a
micro-USB plug to this socket.
ENGLISH 15