User manual

Positioning the lower back strap
To place the BlueTouch Pain Relief Patch in the
lower back strap, follow the steps below.
1 Place the lower back strap and the BlueTouch
Pain Relief Patch in front of you on a table.
Slide the left side of the BlueTouch Pain Relief
Patch behind the elastic edge of the opening in
the strap.
2 Then slide the other end of the BlueTouch Pain
Relief Patch behind the opposite elastic edge of
the opening so that the whole patch is inside
the lower back strap. Check to make sure that
material of the strap does not cover the LEDs.
If necessary, shift the BlueTouch Pain Relief
Patch a little.
3 Remove clothing from the area to be treated.
Note: Make sure the skin in the area to be treated is
clean, entirely dry and free from creams, lotions and
other cosmetics.
4 Wrap the lower back strap with the BlueTouch
Pain Relief Patch in it around your waist with
the treatment area of the device facing your
back.
5 Fasten the lower back strap with the Velcro
strips on both ends of the lower back strap.
Note: Make sure the BlueTouch Pain Relief Patch in
the strap is located on the area to be treated and the
treatment area is in contact with the skin.
6 If the lower back strap does not t around
your body, you can do the following.
ENGLISH 17