User Manual
Table Of Contents
- 1 Important
- Safety instructions
- Cleaning and disinfection
- Disposal of your old product
- About this user manual
- 2 Your SpeechOne
- Product highlights
- What's in the box
- Overview of your SpeechOne
- Overview of the docking station
- Overview of the remote control (PSM6500, PSM6800)
- 3 Get started
- Charging the battery
- Learn about the battery status
- Pairing
- Learn about wireless technology
- Idle mode and Power down mode
- Resetting the wireless connection
- 4 Use your SpeechOne
- Wearing styles
- Create a recording
- Skype calls
- Status light
- Use the remote control (PSM6500, PSM6800)
- Button modes
- Hands-free dictating with a Philips foot control
- Upgrading the firmware
- 5 Service and support
- Contact our supporting Philips partners
- Troubleshooting
- LED colors and meanings
- 6 Technical data
Problem Cuse Solution
The SpeechOne doesn't connect to the
docking sttion.
• Pirings my hve been reset or the
SpeechOne hs been previously
pired with nother docking sttion.
• Strt the piring process s described
in the chpter Piring.
• If re-piring doesn't solve the
problem, reset the wireless
connection. For more informtion, see
Resetting the wireless connection.
The SpeechOne is connected to the
computer but sound will ply on the
computer’s speker only.
• SpeechOne is not selected s the
defult plybck device.
• In the Windows sound settings, select
SpeechOne s the defult plybck
device.
The SpeechOne doesn't record sound. • The input level is too low becuse of
the wrong recording source.
• In the Windows sound settings, select
SpeechOne s the defult recording
device.
My computer cn't detect the foot
control.
• The docking sttion ws connected
to the computer nd/or to the power
outlet before you connected the foot
control.
• Disconnect the foot control from
the docking sttion nd the docking
sttion from the computer nd/or
power outlet. Then reconnect the foot
control to the docking sttion rst
nd fterwrds connect the docking
sttion to the computer nd/or to the
power outlet.
The connection between the
SpeechOne nd the docking sttion is
being interrupted.
• The docking sttion is connected
to low-power USB port on your
computer.
• Additionlly, connect the docking
sttion vi the supplied USB cble to
the power supply unit nd the USB
port for chrging (mrked with 5V DC).
For more informtion, see Chrge vi
docking sttion.
25
Service and support