User Guide

- The shaver, the Jet Clean System (PT920CC) and
the other accessories are not dishwasher-proof.
- Water may leak from the socket at the bottom
of the shaver when you rinse it. This is normal
and not dangerous because all electronics are
enclosed in a sealed power unit inside the shaver.
- Do not use the shaver, Jet Clean System
(PT920CC), adapter or any other part if it
is damaged, as this may cause injury. Always
replace a damaged adapter or part with one of
the original type.
- Use, charge and store the shaver and the Jet
Clean System (PT920CC) at a temperature
between 10°C and 35°C.
- Always place and use the shaver and the Jet Clean
System (PT920CC) on a surface that is uid-
resistant.
- Only use the adapter and accessories supplied.
- Always put the protection cap on the shaver to
prevent damage and to avoid dirt accumulation in
the shaving heads.
- If the shaver and the Jet Clean System (PT920CC)
are subjected to a major change in temperature,
pressure or humidity, let them acclimatise for 30
minutes before you use them.
Jet Clean System (PT920CC only)
- Only use the Jet Clean System with the original Jet
Clean solution (HQ200).
- Always place the Jet Clean System on a stable,
level and horizontal surface to prevent leakage.
- When the Jet Clean System is ready for use, do
not move it to prevent leakage.
- The Jet Clean System thoroughly cleans but does
not disinfect your shaver, therefore do not share
the shaver with others.
ENGLISH8