User manual

Assistance
For assistance visit our website:
www.philips.com/support
or call toll free: 1-800-243-3050
Online information is available 24 hours a day,
7 days a week.
Disposal
 This Philips Norelco Groomer contains a
rechargeable lithium-ion battery, which must be
disposed of properly (fig. 34).
 Contact your local town or city officials for
batteries disposal information or call
1-800-822-8837 or www.rbrc.com for
drop-off locations.
 Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused. For
recycling information, please contact your
local waste management facilities or visit
www.recycle.philips.com.
 For assistance, visit our website:
www.philips.com/support or
call toll free: 1-800-243-3050.
4 Shake excess water from body shaver and
shaving unit and allow to air dry thoroughly.
Do not use a towel to dry the shaving unit as
damage could occur.
5
Apply a drop of oil from the bottle supplied to
the foil every three months and after cleaning.
Replacing the Bodygroom Shaver
Shaving Foil Head
 If the shaving unit is worn or damaged, do not
continue using the Bodygroom shaver. Replace
the shaving unit immediately.
 It is recommended that you replace your
shaving unit once a year.
 A worn or damaged shaving unit should only
be replaced with an original Philips Norelco
shaving foil, model BG2000, which is
available on the Philips Norelco website,
www.philips.com/support or call
1-800-243-3050 for assistance.
 The foil is a precision part. Handle with care.
1 Always switch Groomer OFF and remove
Groomer plug from outlet before
replacing shaving unit.
2 Remove the shaving unit head by pulling it off
the appliance.
3 Place the new shaving unit head on the
Groomer by snapping it into place.
You will hear a “click”.
After replacing the shaving unit head, check that
the shaving head is firmly attached before using
Groomer.
This Groomer has no other user-serviceable
parts. For assistance call 1-800-243-3050.
Storage
 Be sure Groomer is turned OFF. Remove cord
from outlet and Groomer before storing in a
safe, dry location where it will not be crushed,
banged, or subject to damage.
 Store the Groomer and attachments in the
pouch to prevent damage.
 Do not wrap cord around Groomer when
storing.
 Store cord in a safe location where it will not
be cut or damaged.
 Do not place or store Groomer where it can
fall or be pulled into a tub or sink, water or
other liquid while plugged in.
5 Shake excess water from combs and
attachments and allow to air dry thoroughly.
6 Place the attachment back on the Groomer
handle.
NOTE: To maintain optimal trimming
performance, lubricate the teeth of the full-size
metal trimmer, the detail trimmer and the nose
trimmer with a few drops of oil from the bottle
supplied every three months and after cleaning
(fig. 29).
Cleaning the Mini Foil Shaver
1 Separate the top part of the mini shaver
from its body (fig. 30).
2 Blow and/or shake out any hair that may
have accumulated inside the mini shaver.
3 Clean the top part of the mini shaver under
warm tap water.
w The shaving foil is very delicate and should not
be handled.
w If foil becomes damaged, do not continue
using the mini shaver. Do not apply pressure
to shaving foil.
4 Shake excess water from mini shaver and
allow to air dry thoroughly.
Do not use a towel to dry the mini shaver as
damage to the shaving foil could occur.
5 Apply a drop of oil from the bottle supplied
to the foil every three months and after
cleaning.
Cleaning the Body Shaver
1 Pull the shaving unit out of the body shaver
(fig. 31).
2 Blow and/or shake out any hair that may have
accumulated inside the body shaver (fig. 32).
3 Clean the body shaver and shaving unit
under warm tap water (fig 33).
 The shaving foil is very delicate and should not
be handled.
 If foil becomes damaged, do not continue
using the body shaver. Do not apply pressure
to shaving foil.