operation manual

2 Press the shaving head on/off button once to

switch on the shaving head.

QS6161 only: The on/off button lights up to ,

indicate that the shaving head is operating.

3 Place the shaving head on the skin and move

the appliance against the direction of hair

growth while you press it lightly.

4 To switch off the shaving head after use, press

the shaving head on/off button again.

Overload protection

If you press the trimming head or shaving head too

hard onto your skin or if its cutters gets blocked

(e.g. by clothes etc.), the on/off button of the

blocked trimming head or shaving head ﬂ ashes

quickly (QS6161 only) and the appliance switches

off automatically. Remove whatever is blocking the

cutters before you use the appliance again.

Cleaning and maintenance

Clean the appliance after every use.

Never use compressed air, scouring pads, abrasive

cleaning agents or aggressive liquids such as petrol

or acetone to clean the appliance.

Only clean the appliance and the adapter with the

cleaning brush supplied.

Note: The trimming head and shaving head do not

need any lubrication.

Cleaning the trimming head

1 Switch off the appliance.

2 Pull the comb off the trimming head.

3 Clean the trimming head under the tap.

Cleaning the trimming head connector

Note: Make sure that you clean the trimming head

connector at least once every three months.

1 Switch off the appliance.

2 Gently pull the trimming head off the appliance.

3 Remove the hairs from the inside of the

trimming head connector with the cleaning

brush.

ENGLISH ENGLISH