User Manual

6 While holding the SmartClean system with one

hand, gently push the top part of the

SmartClean system back down (‘click’).

Using SmartClean

Note: If you use the shaver with shaving foam,

shaving gel or pre-shave products, briefly rinse the

shaver warm water before you clean it in

SmartClean.

Caution: Always shake excess water off the

shaver before you place it in the SmartClean

system.

1 Press to open the SmartClean cap, to be able to

place the shaver in the holder ('click').

2 Hold the shaver upside down above the holder.

Make sure the front of the shaver points

towards the SmartClean holder.

3 Place the shaver in the holder (1), tilt the shaver

backwards (2) and press down the top cap to

connect the shaver ('click') (3).

The battery symbol on SmartClean starts to

flash, which indicates that the shaver is

charging.

English