operation manual

4 Clean the cutter and guard under the tap.
5 After cleaning, place the cutter back into the
guard.
6 Put the shaving heads back into the shaving
head holder.
Note: Make sure the projections of the shaving heads
t exactly into the recesses.
7 Place the retaining ring holder on the retaining
ring (1), place it on the shaving head (2) and
turn it clockwise (3) to reattach the retaining
ring.
Repeat this process for the other retaining rings.
8 Reattach the shaving head holder to the
bottom part of the shaving unit.
Cleaning the click-on attachments
Cleaning the trimmer attachment
Clean the trimmer attachment every time you have
used it.
1 Switch on the appliance with the trimmer
attachment attached.
ENGLISH30