Quick Start Manual

16
Manually verify / update
firmware
Ensure that your computer is connected to the Internet.1
Connect MUSE to the computer (see section 2 Connect and charge for
instructions).
On your computer, click 3 Start > Programs > Philips Digital Audio Player >
Muse Device Manager to launch Philips Device Manager.
Click 4 Update.
Philips GoGear Muse Device Manager > checks for updates and installs new
firmware from the Internet, if available.
When the display shows 5 Update completed, click OK.
Disconnect MUSE from the computer.6
The display of MUSE shows > Updating firmware.
MUSE restarts after the firmware is updated and is ready for use again. >