User manual

8
Connect and charge
GoGear Opus has a built-in battery that can be
charged through the USB port of a computer
(USB cable included).
Note
For rst-time use, allow GoGear Opus to •
charge for 3 hours.
The charging animation stops and the
•
icon is displayed when the charging process is
completed.
Connect GoGear Opus to a
computer
1 Connect the USB plug of the supplied
USB cable to a spare USB port on your
computer.
2 Connect the small USB plug of the USB
cable to the small USB jack on GoGear
Opus.
3 Turn on your computer.
GoGear Opus charges. »
Battery level indication
The display indicates the approximate levels of
the battery status as follows:
100% 75% 50% 25% 0%
A ashing battery screen indicates that »
the battery is low. The player saves
all settings and switches off within 60
seconds.
Install software
GoGear Opus comes with the following
software:
• Philips Device Manager (helps you get
rmware updates for GoGear Opus)
• Media Converter for Philips (helps
you convert and transfer video les for
GoGear Opus)
• Windows Media Player(helps you
convert and transver music and picture
les for GoGear Opus)
• Napster player (helps you convert and
transfer music les for GoGear Opus)
Important:
Remember to install the software provided in
the supplied CD-ROM for music and/or video
transfer.
Important: Before installing the software,
check that your computer meets the
requirements (see section System
requirements in this user manual).
1 Connect GoGear Opus to your
computer.
2 Insert the CD that comes with GoGear
Opus into the CD-ROM drive of your
computer.
3 Follow the on-screen instructions to
complete the installation of the software.
If the installation program fails to start
automatically:
1 Browse the CD contents with Internet
Explorer.
2 Double click on the le ending with ‘.exe’.
EN