operation manual

14
3 To create a playlist, click New Auto
Playlist, then follow the steps on the
screen to specify criteria. (See also
section Create an Auto Playlist).
4 To remove a playlist, click the playlist
in the list of Playlists to sync, then click
Remove.
5 In the Playlist to sync pane, select the
Priority arrows to arrange them in the
order that you want them to sync.
If GoGear Vibe is full before sync is »
complete, the les and playlists that are
lower in priority on the list are omitted
from sync.
Tip
If your media library is too large to t on •
GoGear Vibe, you can select the Shufewhat
syncs check box, to shufe the les that are
in the playlists to sync. Thereafter, the les on
GoGear Vibe are replaced with a new set of
les (from the Playlists to sync pane) whenever
GoGear Vibe is connected to the computer.
If • WMP11 selects to sync GoGear
Vibe manually, click Finish.
You are required to click the • Sync
tab and manually select the les and
playlists for sync (see section Select
lesandplaylistsformanualsync).
Switch between automatic and
manual sync
After the rst sync setup, you can switch
between automatic and manual sync:
1 Click the down arrow beneath the Sync
tab, then select PhilipsGoGear Vibe >
Set Up Sync.
2 Select or deselect the Sync this device
automatically check box.
Select and prioritize what syncs
automatically
If WMP11 selects to sync GoGear Vibe
automatically, you can choose not to sync
your entire media library. You can choose
what to sync from existing playlists or create
new playlists. The playlists you select sync to
GoGear Vibe every time you connect GoGear
Vibe to the computer.
1 Click the down arrow beneath the Sync
tab and select Philips GoGear Vibe > Set
Up Sync.
The Device Setup dialog box appears. »
2 In the Available playlists pane, select the
existing playlists you want to sync, then
click Add.
EN