User manual

30
14 Update GoGear
Vibe
GoGear Vibe is controlled by an internal
program called rmware. Newer versions of
the rmware may have been released after you
have purchased GoGear Vibe.
The software program called Philips Device
Manager can use your computer to check for
rmware updates that are available on the
Internet.
Install Philips Device Manager on your
computer from GoGear Vibe or download the
latest version from www.philips.com/support.
Note
Your music les are not affected by a rmware •
update.
Manually verify / update
rmware
1
Ensure that your computer is connected
to the Internet.
2 Connect GoGear Vibe to the computer
(see section Connect and charge for
instructions).
3 On your computer, click Start >
Programs > Philips Digital Audio Player
> Vibe Device Manager to launch Philips
Device Manager.
4 Click Update
» Philips GoGear Vibe Device Manager
checks for updates and installs new
rmware from the Internet, if available.
5 When the display shows Update
completed, click OK.
6 Disconnect GoGear Vibe from the
computer.
GoGear Vibe restarts after the »
rmware is updated and is ready for
use again.
EN