Quick Start Manual

15
EN
Update GoGear Vibe
Ensure that your computer is connected to the Internet.1
Connect GoGear Vibe to the computer (see section 2 Connect
and charge for instructions).
On your computer, click 3 Start > Programs > Philips Digital
Audio Player > Vibe Device Manager to launch Philips
Device Manager.
Click 4 Update.
Philips GoGear Vibe Device Manager > checks for updates
and installs new rmware from the Internet, if available.
When the display shows 5 Update completed, click OK.
Disconnect GoGear Vibe from the computer.6
GoGear Vibe restarts after the rmware is updated and is ready >
for use again.