Always there to help you Register your product and get support at www.philips.
Contents 1 Important safety information General maintenance 2 Your new player What's in the box PC software for the player Files loaded on the player Overview Controls LED indicator and audio feedback Use the clip 3 Get started Charge power Switch the player on or off Automatic standby and shut-down 4 Play music Transfer music to the player Play music Switch the random play on or off Search for a song Select sound options 5 Sync with PC music library through Philips Songbird Install Philips Songbird
1 Important safety information Battery life may be shortened in low temperature conditions. Replacement parts/accessories: Visit www.philips.com/support to order replacement parts/accessories. Hearing Safety General maintenance The translation of this document is for reference only. In the event of any inconsistency between the English version and the translated version, the English version shall prevail.
Do not use headphones while operating a motorized vehicle, cycling, skateboarding, etc.; it < ! ! areas. # ! < ! * manufacturer may void user's authority to operate the product. Copyright information All other brands and product names are trademarks of their respective companies or organizations.
b Monkey's Audio source can be included in GPL and open-source software, although Monkey's Audio itself will not be subjected to external licensing restrictions. c Code changes and improvements must be contributed back to the Monkey's Audio project free from restrictions or royalties, unless exempted by express written consent of the author. d Any source code, ideas, or libraries used must be plainly acknowledged in the software using the code.
2 Your new player What's in the box Make sure that you have received the following items: Player Earphones PC software for the player The following PC software can work with SoundClip: Philips Songbird (helps you manage your media library on a PC and the player) Philips Device Manager (helps you get " ! ! & To getPhilips SongbirdandPhilips Device Manageronline, On your PC, download from www. philips.com/Songbird or www.philips. com/support.
b USB connector for power charging and data transfer 3 On the PC, launch Settings.exe. » A pop-up screen is displayed. c 4 Select your language for the voice feedback. 3.5 mm-headphone connector d LED indicator e RESET Press the hole by using the tip of a ball pen when the player does not respond to the pressing of keys LED indicator and audio feedback You can know the status of the player through the LED indicator, and/ or the audio feedback, such as beeps and voice reminders.
3 Get started Switch the player on or off Charge power Press and hold until the green or red indicator lights up. » Power on: The green indicator lights up. Music play starts. » Power off: The red indicator lights up. SoundClip has a built-in battery that can be charged through the USB connector of a computer. Use the USB cable to connect SoundClip to a PC. » When the battery level is less than 30%, the red indicator is always on.
4 Play music Play music Transfer music to the player 1 You can transfer music from your PC media library to SoundClip in the following ways: _ ! ! ] ! " Explorer; Sync through Philips Songbird (see 'Sync with PC music library through Philips Songbird' on page 10). » When music transfer is ongoing, ! \ ! green alternately. Make sure that you have switched on the player (see 'Switch the player on or off' on page 7). » The green indicator lights up.
Search for a song BEEP Press and hold / to skip to the previous or next song. » Beeps sound. Select sound options Change the volume level Press / . » During music play, you hear the change of volume level. Switch FullSound on or off FullSound restores the sonic details that music compression loses (e.g. MP3, WMA). During music play, press and hold and together. » You hear the voice feedback.
5 Sync with PC music library through Philips Songbird With Philips Songbird, you can do the following: Manage your music collection on a PC; Sync SoundClip with your PC music library; Register SoundClip on www.philips. com/welcome. Install Philips Songbird 1 2 Connect SoundClip to a PC. 3 Right click on the Philips GoGear SoundClip icon. Select Download Philips Songbird. Alternatively, click the Philips GoGear SoundClip icon. Double click the setup. exe.
Set iTunes media folder 1 2 Select Tools > Options. 1 On Philips Songbird, go to Tools > Options... 2 Select Media Importer, and then the iTunes Importer tab. 3 In Watch Folders, tick the check box as shown. 3 4 Verify your library location and options. 4 Click Browse, and select the central folder $ _{|} * ! ! & " folder. » In Philips Songbird% ! added or removed as they are in the central music folder.
Sync the player with Philips Songbird 1 2 On the PC, launch Philips Songbird. Connect the player to the PC. » On Philips Songbird, the player is displayed when it is recognized by the PC. 1 Select the player under Devices. » A pop-up screen is displayed. 2 On the pop-up screen, select Manual or Auto. 3 = % Apply. Auto sync Select auto or manual sync = Philips Songbird, select auto sync as prompted.
1 On the Content pane, right click on a ! ! 2 Select Add to Device > SoundClip. » } ! ! SoundClip. Tip = % ! ! " Ctrl button when you click options.
» When the device is connected, "SA4CLPXX" is displayed on the text box. 6 Update the firmware through Philips Device Manager » ` ! " of the device. Install Philips Device Manager 1 2 Connect SoundClip to a PC. 3 Right click on the Philips GoGear SoundClip icon. Select Install Philips Device Manager. Alternatively, click the Philips GoGear SoundClip icon. Double-click the installer.exe.
1 ] " ! * % follow the onscreen instructions to ! " ! ! " 2 Disconnect SoundClip from the PC.
7 Troubleshooting If SoundClip is not working properly or the display freezes, you can reset it without losing data: How do I reset SoundClip? ( Insert a pen tip or other object into the reset hole on SoundClip. Hold until the player shuts down. ( If the reset option is unsuccessful, recover SoundClip through Philips Device Manager: 1 On your PC, launch Philips Device Manager. 2 Enter the recovery mode: a Switch off SoundClip. b Press and hold the volume button , and then, connect SoundClip to your PC.
8 Technical data Note } * " ¹ Rechargeable batteries have a limited number of Power Power supply: 95 mAh Li-ion polymer internal rechargeable battery Play time¹ Audio (.mp3): up to 8 hours Fast charging: 6-minute charging for 60-minute play Software Philips Songbird: To transfer music Philips Device Manager: To update the " ! Connectivity Headphone 3.5 mm USB 2.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. SA4CLP_97_UM_V2.0 wk1233.