operation manual
How to use Philips Lumea Comfort
Philips Lumea Comfort setup
1 Remove the Philips Lumea Comfort device and
other parts from the box.
2 Plug the AC cord into the device socket of the
Philips Lumea Comfort device.
3 Plug the adapter into an electrical outlet.
Your Philips Lumea Comfort is now ready to start.
Treating with Philips Lumea Comfort for
the rst time
Use Philips Lumea Comfort only for its intended
purpose and as described in this user manual.
Make sure that your skin is shaved, clean, dry and
free of any powders, creams, antiperspirants or
deodorants.
1 Press the intensity button briey. The green
intensity level 1 light turns on.
2 About 1 second later, the yellow READY light
turns on. The device is now ready to deliver a
rst ash at the lowest intensity level.
3 If you wish to change the intensity level, press
the intensity button quickly and repeatedly to
increase the intensity level from 1 to 5 and
from 5 directly back to 1, until you reach the
desired level. The green level lights indicate
the level selected (see section ‘Intensity level’
below).
ENGLISH 23