operation manual
4 Place the skin contact surface on the skin.
Make sure that the skin is spread evenly and
smoothly and the skin contact surface is in
full contact with the skin. Make sure that the
yellow READY light starts blinking slowly.
5 Press the ash button. The device rst
determines the color of your skin. If the color
of the skin is light enough for safe treatment,
the device emits a ash of light and produces
a soft popping sound at the same time.
This popping sound is normal for this device.
You may also feel a mild warm and tingling
sensation.
IfyouseenoashandtheyellowREADYlight
blinks rapidly, the skin color warning light warns you
that your skin color is too dark for safe treatment.
Try using the device on a different body part. For
assistance, please visit www.philips.com/support or
call 1-800-243-7884.
6 After emitting a ash, Philips Lumea Comfort
recharges immediately for the next ash.
Recharging takes a few seconds, depending
on the intensity level set. When recharging is
nished, the READY light turns on again.
7 Move the skin contact surface to another area
of skin. When there is full skin contact, the
READY light starts blinking slowly again.
Be careful not to treat the same area of skin more
than once per treatment session! Treating the same
area of skin more than once per session increases
the likelihood of adverse effects.
8 Repeat the process, starting at step 5.
ENGLISH24