User manual

Operating
conditions
Temperature:+10 ºC to 35°C
 Relative humidity: 30% to 75%
Spectrum >475nm

Troubleshooting
This chapter summarizes the most common
problems you could encounter with the device. If
you are unable to solve the problem with the
information below, visit www.philips.com/support
for a list of frequently asked questions or contact
the Consumer Care Center in your country.
Problem Possible cause Solution
The
device/adapter
becomes warm
during use
This is normal. No action required.
When I place the
device on
theskin, it does
not release a
flash. The 'ready
to flash' light
blinks
orangerapidly.
Your skin tone in
the area to be
treated is too dark.
Treat other body areas
with lighter skin tones with
Lumea.
22
English