User Manual
it up in a straight line. Make sure you
pull the nipple through until its lower
part is even with the screw ring.
Cleaning
- Clean all parts before each use.
- After every use, take all items apart,
wash in warm soapy water and rinse
thoroughly. Then sterilize using a
Philips Avent sterilizer or boil for
5 minutes. Make sure that you wash
your hands thoroughly and that the
surfaces are clean before contact
with sterilized components.
- Excessive concentration of
detergents may eventually cause
plastic components to crack. Should
this occur, replace immediately.
- Dishwasher safe - food colorings
may discolor components.
Glass natural bottle
Glass bottles may break. Do not use
metal inside the bottle to stir contents
or for cleaning. This can damage the
glass on the inside of the bottle. Before
each use, inspect bottles for sharp edges
or glass fragments inside. Do not use
bottles if there are any cracks on or glass
fragments in the bottle. Do not let babies
drink unsupervised with this bottle.
Do not use handles with glass bottles.
Prolonged wear or development of
scratches may lead to breakage.
Choosing the right nipple for your baby
The Philips Avent nipples are available
with dierent ow rates to help your
baby with drinking. Over time you can
change the nipple accommodating the
individual needs of your baby. Philips
Avent nipples are clearly numbered
on the side to indicate ow rate (see
image). Make sure you use a nipple with
the correct ow rate when you feed your
baby. Use a lower ow rate if your baby
chokes, is leaking milk or has trouble
adjusting to the drinking speed. Use a
higher ow rate if your baby falls asleep
during feeding, gets frustrated or when
feeding takes a very long time.