User manual

11
English
EN
5 Use your baby
monitor
Link the parent unit to the baby unit:
1 Press and hold on the baby unit for two
seconds.
» The baby unit turns on, and all
indicators on the baby unit light up

2 Press and hold on the parent unit for
two seconds.
» The parent unit turns on, and all
indicators on the parent unit light up

» The link
parent unit starts to search for the
baby unit.
» When the link is established, the link
indicator lights up green.
» If no link is established, the link

beeps from time to time.
Tip
 It takes about 15 seconds to establish the link between
the parent unit and the baby unit.
Position the baby monitor:
Note
 For the optimal monitoring performance, keep the baby
unit 1 to 2 metres (3.5 to 7 feet) away from the baby.
 Place the baby unit away from window or noisy
sources, like a fan, TV, or radio.
 The baby unit should always face towards the baby.
1 Keep the baby unit and the power cord at
least 3.5 feet/1 meter away from your baby.
2 Keep the parent unit at least 5 feet/1.5
meter away from the baby unit to prevent
acoustic feedback.
3 Use the parent unit in the operating range
of the baby unit. Place the parent unit close
by for better sound performance.
Tip
 When the parent unit is out of range of the baby
unit, the parent unit beeps from time to time. The link

> 3.5ft/1m
> 5ft/1.5m