User Guide

- 10 -
--.-
o
CVideo
?
Note: It takes about 15 seconds to establish the link between the
parent unit and the baby unit�
Make sure that the baby unit is switched on. When thebaby unit is
switched o, the display of the parent unit will show the out of range
image�
If no connection has been established, the link light turns red, the
parent unit alert will sound every 20 seconds and the out of range
image appears on the display�
App
Philips Avent
Baby Monitor+
Before you start the set-up procedure, make sure:
- You have wireless Internet access (2�4 GHz Wi-Fi)�
- You are close enough to the Wi-Fi router to have a good Wi-Fi signal�
- If you use a Wi-Fi repeater, make sure that your router and your Wi-Fi
repeater have the same SSID (the network name) and that you use the
same password for the router and the repeater�
- You have the password of your Wi-Fi network at hand� Always connect
the baby monitor to a secure network (see the 'Security and privacy'
chapter)�
1 Make sure that your smart device runs on iOS 11 or higher, or Android
5 or higher� Download the Philips Avent Baby Monitor+ app from the
App Store or Google Play� Use keywords 'Philips Avent Baby Monitor+'
to search for the app�
2 Launch the app�
Tip: You get the best results if you connect your smart device to the
Internet via Wi-Fi� It will then automatically use the Wi-Fi network
to link to your baby monitor� When there is no Wi-Fi connection to
the Internet, your smart device switches to its 3G or 4G mobile data
connection. Use of this data connection may involve extra charges
from your provider, depending on your subscription.
Create new account
Log in
3 Follow the on-screen instructions to create an account�
a Make sure that you use a working email address on which you can
always be reached�
b Use a strong password (see the 'Security and privacy' chapter)�
c When you receive the verication email, follow the instructions in
the email to continue creating your account�
4 Follow the instructions in the app to set up your baby monitor�