SCD921, SCD923 User manual
Table of contents Introduction ����������������������������������������������������������������������������������������������������������������������� 4 General description ���������������������������������������������������������������������������������������������������������� 4 Important safety information ��������������������������������������������������������������������������������������� 5 IMPORTANT ����������������������������������������������������������������������������������������������������
14 1 15 2 11 12 13 3 4 16 5 6 9 8 10 18 17 7 34 23 24 25 30 19 20 21 22 26 27 28 31 29 32 33
Introduction Congratulations on your purchase and welcome to Philips Avent! To fully benefit from the support that Philips Avent offers, register your product at www.philips.com/welcome. Keep an eye on your baby securely and from anywhere with the Philips Avent Connected Baby Monitor. Our Secure Connect System keeps you linked to your little one throughout home. And with the Baby Monitor+ app you can check in, and more, even when you need to be away.
Important safety information Read this important information carefully before you use the appliance and save it for future reference. IMPORTANT This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. Never leave your baby alone in your home. Always make sure there is someone present to look after the baby and take care of its needs. Disclaimer Please note that you use this baby monitor at your own risk.
- Keep the packaging materials (plastic bags, cardboard buffers, etc.) out of the reach of children, as they are not a toy. To prevent electric shock, do not open the housing of the baby unit or parent unit. Battery safety instructions - - - Caution - Only use the product for its intended purpose. Read this information carefully before you use the product and its batteries and accessories, and save it for future reference. Misuse can lead to hazards or serious injuries.
Declaration of conformity Hereby, Philips Electronics Hong Kong Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the EC Declaration of Conformity (DoC) is available online at www.philips.com/support. Compliance with EMF This product complies with all applicable standards and regulations regarding exposure to electromagnetic fields.
When the battery is fully charged, the battery status light turns a continuous white. eco When you charge the parent unit for 3 hours, it can be used cordlessly for up to 12 hours in Eco mode. If the parent unit is switched on during charging, charging takes approximately twice as long. 3 hr = 12 hr When the rechargeable battery of the parent unit is almost empty, the battery status light flashes orange and the low battery alert will sound.
Using the baby monitor Linking parent unit and baby unit 1 Press the on/off button for 1.5 seconds to turn on the baby unit. 1.5s 2 When the baby unit is on, the indicator light turns orange for bootingup. 3 The baby unit is ready for use when the indicator light turns green, you can now connect it with the parent unit. >2 / .5m 8.2 ft 4 Make sure that the parent unit and the baby unit are at least 2.5 meters/ 8.2 feet away from each other to avoid acoustic feedback.
1.5s 5 Press the on/off button for 1.5 seconds to turn on the parent unit. Philips Avent Baby Monitor - The display turns on, the Philips shield appears on the display and the link light turns red. The parent unit starts to search for the baby unit. - When the parent unit and baby unit are linked, the link light turns white on the parent unit and one or more signal strength bars appear on the display. Philips Avent Baby Monitor Video Video 20.3 oC --.
App Philips Avent Baby Monitor+ Create new account Log in Before you start the set-up procedure, make sure: - You have wireless Internet access (2.4 GHz Wi-Fi). - You are close enough to the Wi-Fi router to have a good Wi-Fi signal. - If you use a Wi-Fi repeater, make sure that your router and your Wi-Fi repeater have the same SSID (the network name) and that you use the same password for the router and the repeater. - You have the password of your Wi-Fi network at hand.
Account management There are different access rights for the Admin user and Guest users. You can invite relatives or friends as guest users and allow them to monitor your baby on their smart devices.
Strong passwords Passwords are essential to protect your Wi-Fi network and your account against unauthorised access. The stronger your password, the better protected your Wi-Fi network and your account is. The rules for a strong password are: 1 Has at least 8 characters. 2 Does not contain your name, your baby's name, another real name or a brand name. 3 Does not contain a complete word. 4 Is very different from passwords that you have used before.
>2 .5 8 m/ .2f t 2 To avoid acoustic feedback, make sure that the parent unit is at least 2.5 meters / 8.2 feet away from the baby unit. Note: If you use a cordless phone, wireless video, Wi-Fi network, microwave oven or Bluetooth device on 2.4 GHz and you experience interference on either the parent unit or baby unit, move the parent unit until there is no more interference. 3 There are 2 ways to position the baby unit: a Place the baby unit on a stable, level and horizontal surface.
Operating range <50m/165ft The operating range is up to 50 meters / 165 feet indoors and 400 meters / 1312 feet outdoors. The operating range of the baby monitor varies depending on the surroundings and factors that cause interference. Wet and moist materials cause so much interference that the range loss is up to 100%.
Green Solid green: the baby unit is ready to connect to the parent unit. White Solid white: the baby unit is ready to connect to the parent unit and app. Red (Set up only) 1 Flashes red: you have entered a wrong SSID ID or password. 2 Solid red: the baby monitor failed to connect to internet.
Purple Solid purple: Video live streaming is turned on for one or more app users. Volume You can adjust the speaker volume of the parent unit to the level you prefer. Video Video 20.3 oC 20.3 oC 1 Press the top or bottom part of the control button to adjust the volume. 2 The volume bar appears on the display to show the selected volume level. Note: If the volume is set to a high level, the parent unit consumes more power. Note: When the volume bar is at its minimum, the volume is muted.
Display brightness You can adjust the display brightness of the parent unit to the level you prefer. 1 Press the left or right part of the control button to adjust the brightness of the display on the parent unit. 20.3 oC Video 20.3 oC Video 2 The brightness bar appears on the display to show the selected brightness level. Note: The parent unit consumes more power with a higher brightness. Sound level lights The parent unit continuously monitors the sound level in your baby's room.
Modes and sensitivity This baby monitor has three different modes that allow you to choose how you want to monitor your baby: Video, Audio, Eco. The sensitivity level of the baby unit defines what you hear through the parent unit. When the level is set to high, you will hear many sounds, including soft background sounds. When the sensitivity level is set low, you will hear only the louder sounds.
Video mode 20.3 oC Video Modes and Sensitivity Video < > Audio 1 Press the mode button on the top left of the parent unit. 2 Press the confirm button to select the Video mode. Eco Privacy 20.3 oC Video When the Video mode is activated, the display is always on. 20.3 oC Video Note: Set the sensitivity level to the highest to have continuous sound on the parent unit. Audio mode 20.
Note: The white link light shows that the parent unit is still on and connected to the baby unit. Note: When sensitivity is not set to the highest level, low sounds will be muted. Note: Set the sensitivity level to the highest to have continuous sound on the parent unit. Please see the 'Modes and sensitivity' chapter for more information. If your baby makes any sound, the sound level lights turn on and the sounds detected by the baby unit are transmitted to the parent unit.
Privacy function 20.3 oC Video Modes and Sensitivity Video Audio Eco Privacy Video 20.3 oC App Privacy mode allows you to temporarily disable the camera's live feed to the app. You can still monitor your baby from the parent unit in the selected mode. 1 Press the mode button on the top left of the parent unit. 2 Press the bottom part of the control button to switch to Privacy function. 3 Press the confirm button to activate the Privacy function.
2 Choose Nightlight and press the confirm button to enter the setting options. 20.3 oC Video Menu > Nightlight Zoom Temperature alert Connection Settings 3 Press the confirm button to switch on and off the nighlight function. 20.3 oC Video Nightlight Switch on Brightness low 5 min Timer 20.3 oC Video Nightlight 19:59 Switch off Brightness 5 min Timer The display shows a light icon in the status bar when the nightlight is on. The nightlight of the baby unit turns on. 20.
20.3 oC Video Nightlight Switch off Brightness Timer high < 20 min > You can set the timer of the nightlight from the parent unit. Press the left or right part of the control button to choose the time you prefer. You can also control the nightlight from the baby unit. 1 Press the nightlight button on the baby unit to turn on the function. The nightlight turns on. 2 Press the nightlight button again to switch off.
Soothing sounds You can activate the soothing sounds feature either from the parent unit, the baby unit or the app. To activate it from the parent unit, follow the instructions below: 1 Press the soothing sounds button on the parent unit to open the menu. Note: Pressing the button while the menu is already open, will close the menu. 20.3 oC Video Soothing sound Play > Select sound Volume 6/8 Timer 10 min 3 Press the top or bottom part of the control button to scroll through the list.
20.3 oC Video Soothing sound Play Select sound < Volume Timer 5/8 > 10 min 20.3 oC Video Soothing sound Play Select sound Volume Set timer You can set the volume level of the sound or lullaby from the parent unit. Press the left or right part of the control button to choose the volume level. 5/8 < 20 min > You can set a timer for the soothing sound to stop. Do this from the parent unit. Press the left or right part of the control button to choose the time you prefer.
True talk-back You can use the true talk-back button on the parent unit to talk to your baby. 1 Press the true talk back button on the parent unit. 2 The display of the parent unit shows the true talk back icon, indicating the active connection. Talk clearly into the microphone at the front of the parent unit from a distance between 15-30 cm /0.5-1 ft. The baby can hear you talking into the parent unit. At the same time, you will hear any sounds your baby makes.
Menu features All features described in the following sections can be operated through the menu of the parent unit. 1 Press the menu button to enter the menu list. Note: You will leave the menu when pressing the menu button again. 20.3 oC Video Menu > Nightlight Zoom Temperature alert Connection Settings 2 Use the control button to navigate through the menu. The selected menu item is highlighted purple.
Temperature alert 1 Press the confirm button to access the temperature alert menu. 20.3 oC Video The temperature sensor enables you to monitor the temperature in your baby's room. Note: The current temperature in your baby's room is shown in the status bar of the parent unit. Menu Nightlight Zoom Temperature alert > Connection Settings 2 The temperature alert can be set on or off, press the confirm button to turn it on or off. 20.
Connection 1 Press the confirm button to enter the connection menu. 20.3 oC Video You can choose different connection options with this menu feature. Direct + via Wi-Fi setting helps to extend the wireless range between the camera and parent unit by using your home Wi-Fi router as a bridge. Menu Nightlight Zoom Temperature alert > Connection Settings 2 Press the top or bottom part of the control button and the confirm button to choose the desired connection. 20.
3 Press the confirm button to save the new setting and return to the main menu. 20.3 oC Video Select language Čeština Deutsch English Español Français You can check and update the firmware of the parent unit. 1 Press the confirm button to enter the firmware menu. 20.3 oC Video Settings Language > Firmware Licenses App download 20.3 oC Video Firmware Baby unit �rmware version: X.X.X Parent unit �rmware version: X.X.X Your �rmware is up to date. 20.
Video 20.3 oC Licenses Written offer, Acknowledgments and License Text for any open source software used in this product ----------------------------------======================== OPEN SOURCE SOFTWARE USED IN THE BABY UNIT 2 The display shows your baby monitor's license information. Cleaning and maintenance Warning: Do not immerse the parent unit, baby unit and power adapters in water and do not clean them under the tap. Warning: Do not use cleaning sprays or liquid cleaners.
2 Clean the baby unit with a dry cloth. Note: Fingerprints or dirt on the lens of the baby unit may affect the camera's performance. Avoid touching the lens with your fingers. 3 Switch off the parent unit, remove the power adapter from the parent unit and wall socket. 4 Clean the parent unit with a dry cloth. 5 Clean the adapters with a dry cloth. Storage When you are not going to use the baby monitor for a long time, store the parent unit, the baby unit and adapters in a cool and dry place.
Ordering accessories To buy accessories or spare parts, visit www.philips.com/parts-andaccessories or go to your Philips dealer. You can also contact the Philips Consumer Care Centre in your country (see the international warranty leaflet for contact details). Disposal of your old product and battery Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Guarantee and support If you need information or support, please visit www.philips.com/ support or read the international warranty leaflet. General Information Lithium-ion rechargeable battery (2600mAh) Wi-Fi frequency band: IEEE 802.11 b/g/n 2.4GHz Maximum radio-frequency power: <=20dBm e.i.r.p Supply unit: Model: ASSA105x-050100 / PS06H050K100xD Input: 100-240V 50/60Hz ~0.35A / 100-240V~, 50/60Hz, 0.25A Output: 5.0V 1.0A, 5.0W x = E (EU plug) / x = B (UK plug) Average active efficiency: >=73.
HOW TO USE / CONNECT THE UNITS Problem Solution Perhaps you have more than one set of baby monitor, or the baby and parent unit are too close to each other, keep them at least 1.5 meters / 5 feet away from each other to prevent interference. How can I reset the baby unit? You can reset the baby unit by long-pressing the on/off button for 10 seconds. The baby unit will reboot and the indicator light will flash in green and orange, the reset is completed when the indicator light turns solid green.
NOISE/SOUND Problem Solution Why don't I hear a sound? Why can't I hear my baby cry? Perhaps the parent unit is muted. Unmute it by pressing the top part of the control button and adjust the volume. Perhaps you have muted the app. Unmute it by tapping the mute icon on the video screen. The sensitivity is set too low. Increase the sensitivity in the parent unit's menu or the app to a higher level. The baby unit may be too far away from your baby. Make sure the baby unit is not further than 1.
VIDEO DISPLAY I lose connection to the app frequently. What is the matter? Check if the status light turns green. Check if the Wi-Fi signal in the room where the baby monitor is placed is strong enough and stable. If this is not the case, you need a Wi-Fi repeater to get a strong and stable signal. If you use a Wi-Fi repeater, make sure that your router and your Wi-Fi repeater have the same SSID and that you use the same password for the router and the repeater.
APP /SET UP Problem Solution Perhaps you did not remove the protective foil from the baby monitor lens. Remove the foil. Perhaps part of your hand covers the QR code. Hold your device in such a way that your hand does not cover the QR code. I cannot see my baby. What is wrong? Check if the Wi-Fi signal is strong enough in the room where the baby monitor is placed. The Wi-Fi status light on the front of the baby monitor must be solid white. Perhaps there are already three people monitoring your baby.
APP /SET UP Problem Solution How can I be a guest user? To be a guest user, you have to register a Philips Avent Connected Baby Monitor Account before being able to view the video live streaming. Please create the account as instructed in the app, and contact the administrator that you are ready for the invitation. I am a guest user Perhaps the administrator has temporarily turned on the Privacy mode. already, why I cannot see You should have received a notification about this.
Wall mount Printing instructions: Print this page in scale 100% and use the template to accurately mark the position of the holes for the screws on the wall.
© 2021 Koninklijke Philips N.V. All rights reserved.