User Manual

Drying

1 Assemble the sterilizer (see section “Assembling the sterilizer”) and place the

items to be dried in it�

Note: Make sure all the items are completely disassembled and placed in the basket

with their openings pointing down for eective drying.

Be careful. Hot steam will come out of the sterilizer when drying starts.

2 Place the lid on top of the small or large basket�

3 Put the plug in the wall socket�

4 Turn the on/o button to “Dry” mode. Then press it to

switch on the appliance�

• Drying will start after about 30 seconds� The appliance

warms up to produce warm air to dry items�

• The progress indicator lights ash and go o gradually to

show the appliance is drying�

• When the drying process is nished, the lights go o and

the appliance switches o automatically.

Caution: The base, the baskets and the lid become hot during

or shortly after operation.

5 Remove the lid�

6 Remove the bottles and other items from the basket� Use the tongs to remove the

smaller items�

Be careful� The dried items may still be hot�

Note: Make sure you wash your hands thoroughly before you touch the dried items.

Note: The drying result may vary depending on the ambient temperature, ambient

humidity and loading of sterilizer. You can run one more complete drying cycle if

necessary.

7 Unplug the appliance and wait until the appliance has cooled down completely�

- 15 -