SCF355 User manual
Contents Important ��������������������������������������������������������������������������������������������������������������������������� 3 Electromagnetic fields (EMF) �������������������������������������������������������������������������������������������� 5 Introduction ����������������������������������������������������������������������������������������������������������������������� 6 Using the bottle warmer ������������������������������������������������������������������������������������
Important Read this user manual carefully before you use the bottle warmer and save it for future reference. Danger - Do not immerse the cord, plug or appliance in water or other liquid. Warning - Only use the appliance indoors. - Do not let the mains cord hang over the edge of a table or worktop. Excess cord can be stored in the base of the bottle warmer. - Keep the mains cord away from hot surfaces. - Only connect the appliance to an earthed wall socket.
- - - This appliance can be used by children aged from 3 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children aged less than 3 years. Children shall not play with the appliance. Do not spill water on the mains plug.
Caution - This appliance is intended to be used in household and similar applications such as farm houses, bed and breakfast type environments, staff kitchen areas in shops, offices and other working environments, and by clients in hotels, motels and other residential type environments. - Unplug the appliance when it is not in use. - The surface of the heating element is subject to residual heat after use. - Let the appliance cool down before you clean it.
Introduction Congratulations on your purchase and welcome to Philips Avent! To fully benefit from the support that Philips Avent offers, register your product at www.philips.com/welcome. With this bottle warmer, you can safely warm all Philips Avent feeding bottles and milk/ baby food in containers and other baby food jars. Note: Philips Avent breast milk bags and Philips Avent 60 ml bottles cannot be used in this bottle warmer.
Explanation of settings The bottle warmer is switched off and the light is off. On every other setting, the appliance is switched on and the light is lit. Select this setting when you want to quickly warm a bottle of milk at room temperature (22 °C) with a content from 60 ml to 330 ml or at cold temperature (5 °C) with a content from 60 ml to 240 ml. The bottle has to be taken out immediately after warming to the right temperature, otherwise the milk will be overheated.
Using the bottle warmer with express milk warming setting 1 Put the mains plug in the wall socket. Place a bottle in the bottle warmer. 2 Fill the bottle warmer with drinking water up to the level of the milk in the bottle. In case of large amounts of milk, the maximum level of water is approximately 1 cm below the top of the bottle warmer. An accurate water level ensures correct warming performance. 1 cm 3 Select the desired setting based on the milk volume.
4 The orange light goes on when you select a setting. This indicates that the bottle warmer is on. Note • Whilst warming the milk circulates and heats evenly. 5 Check the express warming reference table for the time required to warm the milk. After the time indicated in the express warming reference table has passed, remove the bottle for feeding or turn the knob to “Keep Warm” to keep milk warm at the right temperature.
6 Always check the temperature before you feed your baby. Gently shake the bottle or milk storage container and check the temperature of the milk by sprinkling a few drops on the inside of your wrist. 7 Turn the knob back to the ‘off’ position. Caution • The water in the bottle warmer might be hot after finishing warming milk / baby food. Be careful that hot water can cause serious burns.
Note • Indicated warming times are based on Philips Avent Natural and Anti-colic polypropylene bottles. Be aware that warming times of Philips Avent Anti-colic with AirFree vent polypropylene bottles and Natural glass bottles deviate from these indications. In addition to bottle type and material, characteristics like thickness may also impact warming time. Therefore it may take less time to warm a larger volume of milk.
Using the keep warm setting to warm milk 1 Put the mains plug in the wall socket. Place the bottle or container in the bottle warmer. 2 Fill the bottle warmer with drinking water up to the level of the milk in the bottle/container. In case of large amounts of milk, the maximum level of water is approximately 1 cm below the top of the bottle warmer. 1 cm 1 cm 3 Select the position of keep warm. At this setting, you can warm your milk at a slow pace and keep it warm at the right end temperature. E.g.
Note • Philips Avent recommends you feed your baby as soon as possible after the milk is warmed. We advise not to reheat the milk after it has cooled down again. • Always check the temperature before you feed your baby. 4 Turn the knob back to the ‘off’ position when the bottle/container is removed from the bottle warmer. Using the bottle warmer with defrost setting 1 Put the appliance plug in the wall outlet. Place the bottle or container in the bottle warmer.
1 cm 3 Select the position of defrost. At this setting, your frozen milk/baby food can be defrosted to liquid state. For frozen milk, check the warming reference table for the expected defrost timings. After your milk is defrosted, choose express warming setting or keep warm setting to warm your milk. Please refer to the previous chapters for usage instructions. Consider the start temperature of your milk around fridge temperature for the warming timings as rough guideline.
Cleaning and descaling Cleaning 1 2 After each use, unplug the bottle warmer and let it cool down. 3 Wipe the outside and inside of the bottle warmer with a moist cloth. » Do not use abrasive, antibacterial cleaning agents, chemical solvents or sharp tools to clean the bottle warmer. Remove the water from the bottle warmer for hygienic reasons. Note • If you used the bottle warmer to warm baby food, make sure that no spilled baby food remains at the bottom of the bottle warmer.
Descaling It is recommended to descale the bottle warmer every four weeks to ensure it works efficiently. 1 Mix 50 ml of white vinegar with 100 ml of cold water to descale the bottle warmer. Switch on the bottle warmer, select the express milk warming setting 1 and let the appliance operate for 10 minutes. Leave the solution in the bottle warmer until all scale has dissolved. 10 min Note • You can also use citric acid based descalers. • Do not use other types of descalers.
Recycling This symbol means that electrical products shall not be disposed of with normal household waste. Follow your country’s rules for the separate collection of electrical products. Support For all product support such as frequently asked questions, please visit www.philips.com/support. Troubleshooting This chapter summarizes the most common problems you could encounter with the appliance.
© 2023 Koninklijke Philips N.V. All rights reserved.