User manual

Step 3: Disinfecting

Supplies needed:

- A household pot

- Drinking-quality water

Caution: During disinfection with boiling water, prevent the bottle or other parts from

touching the side of the pot. This can cause irreversible product deformation or damage

that Philips cannot be held liable for.

1. Fill a household pot

with enough water

to cover all parts and

place all parts in the

pot. Let the water boil

for 5 minutes. Make

sure the parts do not

touch the side of the

pot.

2. Allow the water to

cool down.

3. Gently remove the

parts from the water.

Place the parts on a

clean surface/tea towel

or drying rack to air-dry.

4. Store the dry items

in a clean, dry and

covered container.

Using the breast pump

Cushion size

The Philips Avent single/double electric breast pump has a soft, active cushion. It gently stimulates

your nipple to trigger milk ow. The cushion is made of exible silicone, that adapts to up to 99.98 %

of women, tting nipple sizes up to 30 mm.

Assembling the breast pump

Make sure you have cleaned and disinfected the parts of the breast pump that come into contact

with milk.

Warning: Be careful, when you have disinfected the breast pump parts by boiling

them, they can be very hot. To prevent burns, only start assembling the breast pump

when disinfected parts have cooled down.

Warning: Wash your hands thoroughly with soap and water before you touch

breast pump parts and breasts to prevent contamination. Avoid touching the inside of

containers or lids.

5 min.

English