Screeneo UL5 Smart User Manual Ultra Short Throw Projector Register your product and get support at www.philips.
Table of contents Introduction................................................3 Dear customer............................................................. 3 About this user manual............................................. 3 What’s in the box........................................................ 3 Customer service centre............................................ 3 1 General safety information...............4 Setting up the product.............................................. 4 Repairs.............
Introduction What’s in the box Dear customer b Remote control with 2 AAA batteries Thank you for purchasing this projector. We hope you enjoy this product and the many functions it offers! About this user manual a Screeneo UL5 Smart projector (SCN355/INT) c Quick Start Guide with Warranty Card d AC adapter e AC power cables with plugs x 3 a b The quick start guide supplied with this product allows you to start using this product quickly and easily.
1 General safety information Take note of all warning and safety notes indicated. Do not make any changes or settings that are not described in this user manual. Incorrect operation, and improper handling can lead to physical injury, damage to the product or loss of data. Setting up the product This product is for indoor use only. Place the product securely on a stable, flat surface.
Power supply Use only a power adapter which is certified for this product (see Technical data, page 20). Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. This product complies with the voltage type specified on the product. 2 Overview Front view a b The power outlet shall be installed near the product and shall be easily accessible. CAUTION! Always use the projector off.
Top view Remote control j a b c d e f k a b g h i l m a Projection lens b Autofocus sensor 89.25 Bottom view a 47.00 a 116.75 47.00 b Switch to a different input source. Adjust the focus automatically or manually. c OK Confirm a selection on the screen. d Navigation buttons (Up, Down, Left, Right) • • e a Tripod socket Screw size: M6 (max. length = 20 mm; min. length = 15 mm) Navigate items on the screen. Press / to change the value for the current setting. Access the home screen.
key will freeze the cursor. Press it again to unfreeze the cursor. i Toggle between different picture presets. 3 Initial setup Notice j Switch the projector on or to standby. k • • Return to the previous screen or exit the current screen. Open the sidebar when home screen displays. Make sure all devices are disconnected from their power supplies before establishing or changing any connections.
Connect to power supply CAUTION! Always use the button to turn the projector on and off. 1 2 3 4 1 Open the battery compartment. 2 Insert the supplied batteries (type AAA) with correct polarity (+/-) indicated. 3 Close the battery compartment. • When using a remote control with infrared signals, point the remote control at the IR sensor on the projector, and make sure there is no obstacle between the remote control and the IR sensor. Select a supplied power cable with the correct plug (EU/UK/US).
Step 2: Set the date and time Press the down or up navigation button on the remote control to set the values for the date and time. Press the right or left navigation button to move to the next or previous value. Step 3: Pair the remote control Follow the on-screen instructions to pair the remote control with the projector. Step 4: Set up Wi-Fi Connect the projector to your Wi-Fi network to enjoy online content, or to use screen mirroring. Press the button on the remote control from the home screen.
4 Connect to playback devices Notice Make sure all devices are disconnected from their power supplies before establishing or changing any connections. Connect to devices through USB-C You can connect a playback device (e.g. a smart device or PC) to the projector through USB-C connection. With this connection, images are shown on the projection screen, and audio is played on the projector.
Connect to devices through HDMI™ ARC The HDMI port on the projector supports Audio Return Channel (ARC). You can connect a compatible audio system (e.g. a home cinema system, AV receiver or sound bar) to the projector through HDMI™ ARC connection. With this connection, audio is streamed to the connected audio system. Tip: To get 5.1 surround sound, you typically need to connect the projector to a 5.1 home cinema system. 1 Connect to a dongle You can connect a dongle (e.g.
5 Connect to external speakers or headphones • • You can connect external speakers or headphones to the projector. With this connection, audio from the projector is played through the external speakers or headphones. • The internal speakers of the projector are deactivated automatically when external speakers or headphones are connected to the projector. DANGER! Danger of hearing damage! Before connecting the headphones, turn down the volume on the projector.
6 Media playback The projector has an integrated VLC. Using this media player, you can access and play video and audio files stored in the projector's internal memory or a USB storage device. Notice 4 Select a media file. Note: Only supported media files are displayed on the screen. All folders and files are ordered alphabetically by name. 5 Press the OK button to start playing the selected media file.
7 Change settings 1 Press on the remote control to access the projector's settings menu. 2 Use the navigation buttons and the OK button to select a menu item. 3 Press / or / to select a value for the menu item. 4 Press the OK button to make the change. Note: For some menu items such as Digital Zoom, the change takes effect once you select a different value. 5 • Picture settings You can view and change the following picture settings. Press one or more times to exit the projector's settings menu.
• Sound settings You can view and change the following sound settings. Source Sound Mode Picture Audio Output Sound Volume Projector • • • Reset Settings Sound Mode: Select a predefined sound effect, or select User to customize values on Bass and Treble. Audio Output: Select the projector's audio output type. • Internal Speaker: Use the projector's internal speaker to output audio. • ARC: Use an HDMI™ ARC compatible device to output audio.
Support Source Get In Touch Picture m.me/philipsprojection Sound youtube.com/philipsprojection Projector philips.projector.eu@screeneo.com 8 Maintenance Cleaning DANGER! Follow the following instructions when cleaning the projector: System Support Use a soft, lint-free cloth. Never use liquid or easily flammable cleansers (sprays, abrasives, polishes, alcohol, etc.). Do not allow any moisture to reach the interior of the projector. Do not spray the projector with any cleaning fluids.
CAUTION! Do not turn off the projector or remove the USB flash drive during a software update. OTA firmware update 1 2 3 4 5 6 7 17 Visit www.philips.com/support, find your product (model number: SCN355/INT), open its support page and locate "Software & drivers". Download the update package and unzip it if necessary. You should get an update file named "SCN355INT_firmware.zip". Copy this file to the root directory of a USB flash drive. Note: Do not unzip this file. Turn on the projector if it is off.
9 Troubleshooting Power cycling If a problem occurs and you cannot resolve it using the instructions in this user manual, try the following steps to resolve the problem. 1 Turn the projector off by pressing 3 Turn the projector on by pressing and holding 2 4 Wait at least 10 seconds. twice. for 2 seconds. If the problem persists, contact one of our customer service centres or your dealer. Problem Solution The projector cannot be turned off. • No image from the external HDMI™ device. 1.
Problem Solution • Check the batteries of the remote control. The temperature of the projector’s surface is warm. • For this projector it is normal to generate moderate heat during operation. The projector does not react to remote control commands. The projector does not work after I connect it to a laptop. • I cannot pair the projector with a Bluetooth device. • • • • • • • Check that the HDMI™ cable is plugged in correctly. Make sure that the laptop has been switched to projector display.
10 Appendixes Technical data Technology/optical Display technology...............................................TI DLP Light source......................................................RGB laser Colorimetry & metadata.................................REC.709 Resolution.......................................1920 × 1080 pixels RGB laser lifetime........................... over 30,000 hours Contrast ratio....................................................... 1800:1 Aspect ratio...........................
CE statement • The product shall only be connected to a USB interface of version USB 2.0 or higher. • Adapter shall be installed near the equipment and shall be easily accessible. • The operating temperature of the EUT can’t exceed 35°C and shouldn’t be lower than 5°C. • The plug is considered as disconnect device of adapter. • The UNII Band 5150-5250 MHz is for indoor use only. • The device complies with RF specifications when the device is used at 20 cm from your body.
This device should be installed and operated with a minimum distance of 7.8 inches (20 centimetres) between the device and your body. Other notice Preservation of the environment as part of a sustainable development plan is an essential concern of Screeneo Innovation SA.
As with any bright light source, do not stare into the beam, RG2 IEC 62471-5:2015. • This product complies with EN608251:2014+A11:2021. • This product complies with EN50689:2021. • This product is designed to project images on a wall or screen. CAUTION • • • • • • 23 Do not look into the lens while in use. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Screeneo Innovation SA Route de Lully 5c - 1131 Tolochenaz - Switzerland Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Screeneo Innovation SA is the warrantor in relation to the product with which this booklet was packaged. Screeneo UL5 Smart 2024 © Screeneo Innovation SA. All rights reserved.
