EN User Manual FR Manuel utilisateur DE Bedienungsanleitung ES Manual del usuario IT Manuale d’uso PT Manual do Utilizador NL Gebruiksaanwijzing CZ Návod k použití Register your product and get support at www.philips.
User Manual Register your product and get support at www.philips.
Table of contents Introduction �������������������������������������������������3 9 Change settings ����������������������������������18 Dear customer ���������������������������������������������������������������3 Language and input settings ���������������������������������18 About this user manual ����������������������������������������������3 Picture settings ������������������������������������������������������������18 What’s in the box ���������������������������������������������������������
Introduction What’s in the box Dear customer b Remote control with 2 AAA batteries Thank you for purchasing this projector. d Power adapter We hope you enjoy this product and the many functions it offers! About this user manual a Screeneo S4 projector (SCN450) c AC power cable with plug x 4 e Quick Start Guide a b The quick start guide supplied with this product allows you to start using this product quickly and easily.
1 General safety information Take note of all warning and safety notes indicated. Do not make any changes or settings that are not described in this user manual. Incorrect operation, and improper handling can lead to physical injury, damage to the product or loss of data. touching the lens. Never place heavy or sharp objects on the product or on the power cable. If the product gets too hot or emits smoke, shut it down immediately and unplug the power cable.
Do not remove the type label from this product, as this will void the warranty. 2 Overview Power supply Top/Front view Use only a power adapter which is certified for this product (see Technical data, page 24). Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. This product complies with the voltage type specified on the product. a b The power outlet shall be installed near the product and shall be easily accessible.
Rear view Remote control i h gf e d c b a a b n SERVICE S/PDIF c HDMI m a HDMI connector b c d e f g h i Connect to an HDMI output on a playback device. USB 3.0 port Connect to a USB storage device for media play. USB 2.0 port Connect to a USB storage device for media play. LAN port Connect to a LAN port on a broadband modem or router. S/PDIF connector Connect to an optical input on a playback device. DC socket Connect to the power supply.
g Adjust image sharpness. h Color buttons 3 Initial operation Select tasks or options when using application services. Placement Mute or restore volume. You can install the projector in four different configurations. Follow the guidelines below for different projector placement. Access the home screen. Notice i j For overhead mounting on ceiling, purchase a projector mount recommended by an installation professional and follow the instructions that come with the mount.
Front ceiling Rear ceiling 1 Mount the projector on the ceiling with upside up in front of the projection screen. A projector mount is required to mount the projector on ceiling. 1 Mount the projector on ceiling with upside up behind the projection screen. To mount the projector on ceiling behind the screen, a projector mount and a special rear projection screen is required.
Connect power supply 1 Open the battery compartment. 2 Insert the supplied batteries (type AAA) with correct polarity (+/- ) indicated. 3 Close the battery compartment. • When using the remote control, point the remote control at the IR sensor on the projector, and make sure there is no obstacle between the remote control and the IR sensor. CAUTION! Always use the button to turn off the projector. This is essential to prevent damage to the LED lamp.
Image shape correction Image focus adjustment You can correct distorted images to be rectangular or square. Two image correction methods are available. You can adjust image focus or clearness. 1 Press the button on the remote control to adjust image focus. To fine tune focus, press the or button. • Auto focus adjustment is also available. You can enable or disable auto focus adjustment. Press and go to Image - Autofocus Settings.
• • 2 Time Zone: Select your time zone. Keyboard Input Method: Select English keyboard or Gboard. When the settings are made, press to return to Step 1 interface and select Next to proceed to Step 2 interface. Notice If you select Gboard as your input method, you need to activate on-screen pointer feature before you can input text through pop-up virtual Gboard (see Step 2: activate on-screen pointer, page 11).
Set up the wired network If the wireless network does not work properly, connect the projector to Internet through the wired network. What you need • • A network router A network cable 1 Using a network cable, connect the connector on the projector to the network router. 2 Press 3 Select and access the Ethernet Connection settings. 4 Follow on-screen instructions to complete the setup.
Use on-screen pointer The on-screen pointer is required for the following cases (see Step 2: activate on-screen pointer, page 11 ). • • Activate letter selection from pop-up virtual Gboard keyboard. Select a service item on web pages, e.g. web link selection, and activation of text input in the URL or search bar. Input text on web pages 1 Move the on-screen pointer in the text field, e.g. URL or search bar. 2 Press OK on the remote control. The text cursor appears in the text field.
Bluetooth re-connection Quick access to turn Bluetooth on/off • Press to display the Bluetooth settings, then press OK to turn Bluetooth on or off. • The projector is re-connected to the last connected device automatically when the projector is in Bluetooth mode (in standby). To disable automatic re-connection with the Bluetooth device, turn off Bluetooth function in standby (press and go to Sound - Bluetooth speakers).
6 Connect to playback devices Connect to devices through S/PDIF Connect to devices through HDMI 1 Connect a digital device (e.g. a home cinema system or sound bar) to the projector through S/PDIF connection. With this connection, audio is streamed to the connected digital device. Connect a playback device (e.g. a Blu-ray player, gaming console, camcorder, digital camera or PC) to the projector through HDMI connection.
7 Browse storage devices Through the projector, you can access and play the pictures, audio and video files stored on the local storage and connected storage devices (e.g. a USB flash drive, HDD, camcorder or digital camera). 1 Using a USB cable, connect the port (either USB 2.0 or USB 3.0) on the projector to the USB port on your storage device. • Play video from storage devices The supported file formats are listed in the “Technical data” section (see Technical data, page 24).
8 Wireless projection This projector allows you to wirelessly mirror the following devices to the projection screen. • • • • iOS devices Mac Android devices Windows PC Wireless projection with iOS devices What you need • • Enable Wi-Fi both on the projector and your iPhone. Make sure the projector and your iPhone are in the same Wi-Fi network. 3 On your Mac, access the screen mirroring option located on the top of the computer screen, then select the projector name to connect your Mac to the projector.
Wireless projection with Windows PC What you need • • • Visit www.hpplay.com.cn. Download and install the HappyCast app for Windows on your Windows PC. Enable Wi-Fi both on the projector and your Windows PC. Make sure the projector and your Windows PC are in the same Wi-Fi network. 1 Press on the remote control to access the settings options. 2 Select Mirroring to access the mirroring interface. The mirroring function on the projector is enabled now. 3 Launch the HappyCast app on your Windows PC.
• • • Keystone Correction: Correct keystone or distorted images to be rectangular or square. Custom Correction: Adjust image shape according to your need. FlowMotion: Switch MEMC (motion estimation motion compensation) for motion interpolation to alleviate display motion blur. To access color mode During video play, press on the remote control, then use the Navigation buttons and OK to access the color setting and its options. • Color: Select a predefined color setting for picture and video display.
Check memory You can check the total and available memory (RAM and internal memory) of the local storage. 1 Press 2 Use the Navigation buttons and OK to select About. 10 Service Cleaning . DANGER! Instructions for cleaning! Before cleaning, always turn the projector off and disconnect the power cable. Use a soft, lint-free cloth. Never use liquid or easily flammable cleansers (sprays, abrasives, polishes, alcohol, etc.). Do not allow any moisture to reach the interior of the projector.
2 3 Use a soft cloth or brush to remove dust and lints inside the ventilation grilles. Replace the ventilation grilles after cleaning. Update software through USB 1 Check the latest software version on www. philips.com/support. Find your product (model number: SCN450), and locate ‘Software and drivers’. 2 On a computer, download the software into the USB flash drive, and rename the file name as “update_screeneo.zip”.
Troubleshooting 1 Turn the projector off by pressing within one second. Power cycling 2 Wait at least ten seconds. If a problem occurs that cannot be corrected with the instructions in this user manual, follow the steps given here. 3 Turn the projector on by pressing 4 If the problem persists, please contact our technical service centre or your dealer. twice once. Problems Solutions The projector cannot be turned on.
Problems Solutions Measures to take if Screen Mirroring does not work anymore after a firmware update of an Android or iOS device. • We recommend checking regularly for new firmware of your projector (see Update software, page 20). • Launch the screen mirroring app on your projector (press on the remote control, select and access the Mirroring option). Screen mirroring does not work with the available Android device. • In order to allow screen mirroring, your device must support Miracast.
11 Appendix Technical data Technology Display technology................................................DLP Light source..............................................................LED LED lifetime...............................up to 30,000 hours Brightness.......................up to 1800 Color Lumens Contrast ratio................................................150,000:1 Resolution...................................... 1920 x 1080 pixel Throw ratio.........................................................
CE statement 15.105 Information to user. • The product shall only be connected to a USB interface of version USB 2.0 or higher. • Adapter shall be installed near the equipment and shall be easily accessible. • The operating temperature of the EUT can’t exceed 35°C and shouldn’t be lower than 5°C. • The plug is considered as disconnect device of adapter. • The UNII Band 5150-5250 MHz is for indoor use only. • The device complies with RF specifications when the device is used at 20 cm from your body.
Other notice Preservation of the environment as part of a sustainable development plan is an essential concern of Screeneo Innovation SA. The desire of Screeneo Innovation SA is to operate systems respecting the environment and consequently it has decided to integrate environmental performances in the life cycle of these products, from manufacturing to commissioning use and elimination.
Screeneo Innovation SA Route de Lully 5c - 1131 Tolochenaz - Switzerland Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. Screeneo Innovation SA is the warrantor in relation to the product with which this booklet was packaged. Screeneo S4 2019 © Screeneo Innovation SA. All rights reserved.
