Screeneo U5 User Manual Ultra Short Throw Projector Register your product and get support at www.philips.
Table of contents Introduction �������������������������������������������������3 5 Connect to playback devices �����������14 Dear customer ���������������������������������������������������������������3 Connect to devices through HDMI™ �������������������14 About this user manual ����������������������������������������������3 Connect to devices using HDMI™ ARC ���������������14 What’s in the box ����������������������������������������������������������3 Connect to devices through S/PDIF ���������
Introduction What’s in the box Dear customer b Remote control with 2x AAA batteries Thank you for purchasing this projector. We hope you enjoy this product and the many functions it offers! a Screeneo U5 projector (SCN550/INT) c Lifting screws x 4 d Quick Start Guide e Power cable with plug x 4 a About this user manual The quick start guide supplied with this product allows you to start using this product quickly and easily.
1 General safety information Take note of all warning and safety notes indicated. Do not make any changes or settings that are not described in this user manual. Incorrect operation, and improper handling can lead to physical injury, damage to the product or loss of data. Setting up the product This product is for indoor use only. Place the product securely on a stable, flat surface.
Power supply • Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. This product complies with the voltage type specified on the product. • The power outlet shall be installed near the product and shall be easily accessible. • As with any bright light source, do not stare into the beam, RG2 IEC 62471-5:2015. When turning on the projector, make sure no one within projection range is looking into the lens.
2 Overview Connection ports Top view a b c d e LAN COAXIAL AUX SPDIF RS-232 HDMI 1 HDMI 2 (eARC) h g USB (5V/1A) USB (5V/1A) f a LAN For wired network connections. a b b COAXIAL The coaxial output mainly provides the transmission of digital audio signals and can be connected to an external sound system. a Eye protection sensor b • • Power button and indicator Press for 2 seconds: switch the projector on or off. Press for 1 second: switch the projector to standby.
Side view Remote control k j a b c i d h a e b a Ventilation mesh g b Speakers f Bottom view a Access voice search function (Google Assistant). b Confirm a selection or entry. a b a Height adjusting kickstand c Access the Settings menu. d Return to Android TV home screen. b Lifting screw hole e Electric focus adjustment. f Mute/unmute projector audio. g / Decrease or increase volume. h App buttons Quick access to streaming services Disney+, Prime Video and Youtube.
3 Installation Place the projector You can install the projector in four different configurations. Follow the guidelines below for different projector placement. Notice For overhead mounting on ceiling, purchase a projector mount recommended by an installation professional and follow the instructions that come with the mount. Before mounting on the ceiling, make sure the ceiling can support the weight of the projector and mounting kit.
2 To adjust projection to the correct position, go to Settings - Projector Settings -Display Mode, then select Rear Hoisting. Screen size and installation distance The distance between projector and screen is proportionate to display size, the closer the projector and the screen, the smaller the display size. Conversely, the bigger the display size. Please read screen user manual carefully before installing.
3 Close the battery compartment. Notice When using the remote control, point the remote control at the IR sensor on the projector, and make sure there is no obstacle between the remote control and the IR sensor. Power on and set up Pair the remote control with the projector The remote control for this projector is bounded with IR and Bluetooth functions together. To use the remote control in Bluetooth mode, follow the on-screen guidance to pair remote control with projector at first use.
2 Select your Wi-Fi network from the list and press OK. 3 Input your Wi-Fi network password using the on-screen virtual keyboard. Then select the right arrow on the right side of the virtual keyboard and press OK. Sign into your Google account To access the abundant range of Android apps, you need to sign into your Google account. 1 Notice The Google Play Store apps come from 3rd party developers. Some apps may or may not work correctly. Only the preloaded apps have been tested by Philips.
Image smaller than screen Move the projector further away from the screen. Part of the image is below the screen Move projector upwards or move screen down. Image bigger than screen Down trapezoid Rotate the height adjusting kickstand counterclockwise. Move the projector closer to the screen. Image falls to the left of screen Move projector rightwards. Up trapezoid Rotate the height adjusting kickstand clockwise. Image falls to the right of screen Move projector leftwards.
Focus adjustment 1 Press the key on the remote control, or press the key then select Projector Settings - Focus Adjustment. 2 Adjust the focus according to the screen prompts until the screen becomes clear from blurry. 2 Select an app and press OK to show the options. Available options depends on the app attributes. 3 To uninstall an app, select Uninstall. The app uninstallation page is displayed. Only user-arranged apps can be uninstalled. Pre-installed apps cannot be uninstalled.
Media Player The projector has a built-in media player. Using this media player, you can play videos, music or view images stored on a USB storage device. 1 Select the Media Player app icon from the app list on the home page. 2 The media center supports audio and video file playback control, picture presentation and app installation. 3 The media center divides multimedia content into four types: video, picture, music and all types.
1 Connect the HDMI™ cable to the ARCcompatible HDMI™ port on your external speakers or AV receiver. 6 Other features 2 Connect the other end to the port on the rear of the projector. Connect to external speakers or headphones LAN COAXIAL HDMI 1 SPDIF AUX RS-232 USB (5V/1A) HDMI 2 (eARC) USB (5V/1A) Connect external speakers or headphones to the projector. With this connection, audio from the projector is played through the external speakers or headphones.
Connect to Bluetooth speaker • Through Bluetooth, you can stream music wirelessly from the projector to a Bluetooth speaker. Device auto power off: If enabled, the connected HDMI™ device turns off automatically when the projector is turned off. TV auto power on: If enabled, the projector automatically turns on when an HDMI™ CEC device is turned on. • Notice The projector cannot be connected to a smartphone or tablet for music streaming through Bluetooth.
7 Change settings This section helps you change the settings of the projector. 1 To access the Settings menu, use the Navigation buttons to select the icon in the upper right corner of the screen, then press OK. 2 Use the Navigation buttons and OK to select and change settings. Language settings Go to Device Preferences - Language to select a language for the on-screen menus. Date and time settings Go to Device Preferences - Date & Time to access the following settings.
• • • • • • • Enable/disable surround sound effect. Speakers on or off. Enable/disable eARC. Enable/disable digital output. Turn DTS DRC feature on or off. Reset to Default: Reset the sound settings to factory default values. and more. • Configure IP settings and proxy settings of Ethernet. Bluetooth settings Go to Remotes & Accessories - Add accessory to pair the projector with the remote control, or a Bluetooth speaker/keyboard/mouse/ gamepad.
Projector settings Quick settings 1 Select 2 Select Projector Settings, and then press OK. 3 Through the Projector Settings, you can make the following changes: Quick settings appear when you are in HDMI™ input. If you plug an external device, select this device in the HDMI™ input and press on the remote control, a new horizontal menu will appear in the bottom of screen. • • • • • • to access Settings menu. Dolby Vision: Change the screen size and gain.
8 Service 4 Cleaning 5 DANGER! Instructions for cleaning! Use a soft, lint-free cloth. Never use liquid or easily flammable cleansers (sprays, abrasives, polishes, alcohol, etc.). Do not allow any moisture to reach the interior of the projector. Do not spray the projector with any cleaning fluids. Select Check for update and press OK. • If an update is available, you are prompted to start or cancel the update. Follow the on-screen instructions to complete the update.
Problems Solutions The projector cannot be turned on. • Disconnect and reconnect the power cable, and try to turn the projector on again. The projector turns itself off. • When the projector is running for a long period of time, the surface becomes hot. Ventilate the projector properly, with at least 30 cm clearness around all the sides of the projector. • Check that the power cable is connected correctly. The projector cannot be turned off. • Press and hold The projector cannot read the USB stick.
9 Appendix Technical data Operating system Android TV™ 11 with full catalog of Apps Google Chromecast................................................ yes Google Assistant...................................................... yes Technology/optical Display technology ....................DLP Cinema Chip Connection Light source .......................................................... Laser Wi-Fi MIMO............802.11a/b/g/n/ac 2.4 + 5 GHz Light sources life...............
CE statement • • • • The product shall only be connected to a USB interface of version USB 2.0 or higher. Adapter shall be installed near the equipment and shall be easily accessible. The operating temperature of the EUT can’t exceed 35°C and shouldn’t be lower than 5°C. The plug is considered as disconnect device of adapter. • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Screeneo Innovation SA/PHILIPS products. Product: The crossed-out waste bin symbol on the product means that the product belongs to the family of electrical and electronic equipment. In this respect, the European regulations ask you to dispose of it selectively: • At sales points in the event of the purchase of similar equipment. • At the collection points made available to you locally (drop-off centre, selective collection, etc.).
Screeneo Innovation SA Route de Lully 5c - 1131 Tolochenaz - Switzerland Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Screeneo Innovation SA is the warrantor in relation to the product with which this booklet was packaged. Screeneo U5 2022 © Screeneo Innovation SA. All rights reserved.
