Digital cordless phone Digital cordless phone with answering machine SE240 SE245 Welcome Quick start guide 1 2 3 Connect Install Enjoy
What’s in the box? SE240/SE245 handset SE240 or SE245 base Power adaptor Line cord* Battery door 2x AAA rechargeable batteries %JHJUBM DPSEMFTT QIPOF %JHJUBM DPSEMFTT QIPOF XJUI BOTXFSJOH NBDIJOF 4& 4& 4& 8FMDPNF 2VJDL TUBSU HVJEF XXX QIJMJQT DPN TVQQPSU $POOFDU *OTUBMM &OKPZ &/ 5FMFQIPOF 8BSOJOH 6TF POMZ SFDIBSHFBCMF CBUUFSJFT $IBSHF UIF IBOETFU GPS IPVST CFGPSF VTF User manual Quick start guide Warranty information Notes * The line adaptor may not be attached to
1 A Connect Position the base Place the base within reach of the telephone line and power sockets. B Connect the cables Plug the line cord and power cable into the sockets at the back of the base. Tip Placing the base too close to large metal objects or electrical appliances can impair the range and sound quality. Thick walls may also impair transmission of signals to and from the base. C Plug into the sockets Plug the other end of the cables into the wall sockets.
2 A Install Install the batteries Warning Leave the handset to charge for at least 24 hours before first use. C Set up your phone If the display shows the standby screen, your phone is ready to use. Or If the display shows WELCOME: you must select your country. Please see page 16 in the main user guide for more information. Insert the batteries and slide the battery door into place. B Charge handset • Press or to select your . country and press • Display shows CONFIRM?. .
3 Enjoy Make a call Enter the phone number and press . • • • • Answer a call When the phone rings, press . Adjust earpiece volume During a call, press or . Redial last number then . Change the ringer volume and ringtone • Press , scroll to PERSONAL SET and press . • HANDSET TONE is displayed, press . RING VOLUME is displayed, press . • Press or to adjust the ringer volume level and press to save the setting. • Scroll .
Troubleshooting For more solutions, see the full FAQs section in the main guide. No dialling tone • Check the connections. Unplug your phone then plug back in the mains power. • Batteries are empty – charge the batteries for at least 24 hours. • You may be too far from the base – move closer. • Use the line cable provided. Poor sound quality • Move closer to the base. • Move the base at least one metre away from any electrical appliances. The icon is blinking • Move closer to the base.
