Always there to help you Register your product and get support at www.philips.
1 Important Hearing Safety Electric-, Magnetic- and Electromagnetic Fields (EMF) General information Disposal of your old product Remove the integrated battery Notice for the European Union Trademarks 2 Your bluetooth stereo headset Introduction What's in the box What else you'll need Compatibility Overview of your Bluetooth stereo headset 2 2 2 2 3 3 3 3 4 4 4 4 4 5 3 Get started 6 Charge the headset 6 Pair the headset with your mobile phone 6 4 Use the headset Connect the headset to a mobile phone
1 Important Hearing Safety Danger •• To avoid hearing damage, limit the time you use the headphones at high volume and set the volume to a safe level. The louder the volume, the shorter is the safe listening time. Be sure to observe the following guidelines when using your headphones. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts.
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.
2 Your bluetooth stereo headset EN Quick start guide Philips Bluetooth stereo headset SHB4000/SHB4000WT Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
English Overview of your Bluetooth stereo headset a Volume/Track control b • Turn the headset on or off • Play/Pause/Pick up call/Hang up/Redial/ Reject call c Mic d Charging slot EN 5
3 Get started Charge the headset Warning •• Before you use your headset for the first time, charge the battery for four hours for optimum battery capacity and lifetime. •• Use only the original USB charging cable to avoid any damage. •• End a call before charging the headset, as connecting the headset for charging will power off the unit. Plug the headset into a powered USB port with an USB charging cable. »» LED turns white during charging and turns off when the headset is fully charged.
Connect the headset to a mobile phone 1 2 Turn on your mobile phone. Press and hold to turn the headset on. »» The blue LED flashes. »» The headset is reconnected to the last connected device automatically. If the last one is not available, the headset tries to reconnect to the second last connected device. Tip •• If you turn on the mobile phone or its Bluetooth feature after turning on the headset, connect the headset from the Bluetooth menu on your mobile phone.
Wear your headset Adjust the headband for the best fit.
• Up to 9 hours of play time or talk time • Up to 200 hours of standby time • Normal time for a full charge: 3 hours • Rechargeable Lithium-Polymer battery (200 mAh) • Bluetooth 3.
6 Frequently asked questions Bluetooth headset does not switch on. Battery is low. • Charge the headset. Fail to pair with a mobile phone. Voice dialing or redialing does not work. Your mobile phone may not support this feature. The headset is connected to a Bluetooth stereo enabled mobile phone, but music will play on the mobile phone's speaker only. The mobile phone may have the option to listen to music via speaker or headset. • Bluetooth disabled.
English I hear but cannot control music on my device (e.g. skip forward/backward). The Bluetooth audio source does not support AVRCP. • Refer to the user manual of the audio source for detailed information on compatibility. Please visit www.philips.com/support for further support.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved.