Always there to help you Register your product and get support at www.philips.
Contents 1 Important Hearing Safety General information 2 Your Bluetooth wireless headphones What's in the box Other devices Overview of your Bluetooth wireless headphones 3 Get started Charge your headphones Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Use your headset Clip the headphones 2 2 2 3 3 3 3 4 4 4 6 6 6 7 5 Technical data 8 6 Notice 9 9 Declaration of con
1 Important General information To avoid damage or malfunction: Hearing Safety Caution •• Do not expose headphones to excessive heat. •• Do not drop your headphones. •• Headphones shall not be exposed to dripping or splashing. •• Do not allow your headphones to be submerged in water. •• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives. Danger •• To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level.
2 Your Bluetooth wireless headphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips wireless in-ear headphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music. Other devices A mobile phone or device (e.g.
3 Get started Charge your headphones Note •• Before you use your headphones for the first time, charge the battery for 4 hours for optimum battery capacity and lifetime. •• Use only the original USB charging cable to avoid any damage. •• Finish your call before charging the headset, as connecting the headphones for charging will power the headphones off. Connect the supplied USB charging cable to: • the USB connector of the headphones and; • USB power source.
The following example shows you how to pair the headphones with your mobile phone. 1 2 Activate the Bluetooth feature of your mobile phone, select Philips SHB5100. Enter the headphones password "0000" (4 zeros) if prompted. For those mobile phones featuring Bluetooth 2.1+EDR or higher, no need to enter a password.
4 Use your headphones Connect the headphones to a Bluetooth device 1 Turn on your mobile phone/Bluetooth device. 2 Press and hold to turn the headset on. »» The blue LED flashes. »» The headphones are reconnected to the last connected mobile phone/Bluetooth device automatically. If the last one is not available, the headphones try to reconnect to the second last connected device.
The battery is fully charged. The white LED is off. Clip the headphones Note •• To keep the high sound quality, clip the headphones within 20cm from your mouth.
5 Technical data • • • • • • • Up to 9 hours of play time or talk time Up to 200 hours of standby time Normal time for a full charge: 3 hours Rechargeable Lithium-Polymer battery (200 mAh) Bluetooth 3.
6 Notice Declaration of conformity Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c.philips. com. Disposal of your old product and battery household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.
packaging materials, exhausted batteries and old equipment. Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.
7 Frequently asked questions My Bluetooth headphones do not switch on. The battery level is low. Charge the headphones. I cannot pair my Bluetooth headphones with a mobile phone. The Bluetooth is disabled. Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headphones. Pairing does not work. Make sure the headphones are in pairing mode. • Follow the steps described in this user manual (see 'Pair the headphones with your mobile phone' on page 4).
2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. UM_SHB5100_00_EN_V1.