Always there to help you Register your product and get support at www.philips.
Contents 1 Important safety instructions Hearing Safety General information 2 Your Bluetooth in-ear headphones What's in the box Other devices Overview of your Bluetooth in-ear headphones 3 Get started Charge your headphones Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music Share your music 5 Technical data 2 2 2 3 3 3 3 4 4 4 6 6 6 7 8 6 Notice 9 Declaration of conformity 9 Disposal of your old product and batt
1 Important safety instructions Caution •• Do not expose headphones to excessive heat. •• Do not drop your headphones. •• Headphones shall not be exposed to dripping or splashing. •• Do not allow your headphones to be submerged in water. •• Do not use any cleaning agents containing alcohol, Hearing Safety Danger •• To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is.
2 Your Bluetooth in-ear headphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips wireless in-ear headphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music. What's in the box Quick start guide Other devices A mobile phone or device (e.g.
3 Get started • • Manual pairing NFC pairing Manual pairing Charge your headphones Note 1 2 •• Before you use your headphones for the first time, charge the battery for 5 hours for optimum battery capacity and lifetime. •• Use only the original USB charging cable to avoid any damage. •• Finish your call before charging the headphones, as connecting the headphones for charging will power the headphones off. •• You can operate the headphones normally during charging.
2 Enter the headset password "0000" (4 zeros) if prompted. For those mobile phones featuring Bluetooth 3.0 or higher, no need to enter a password.
4 Use your headphones Connect the headphones to a Bluetooth device 1 2 Turn on your mobile phone/Bluetooth device. Press and hold the on/off button to turn the headphones on. »» The blue LED flashes. »» The headphones are reconnected to the last connected mobile phone/ Bluetooth device automatically. If the last one is not available, the headphones try to reconnect to the second last connected device.
The headphones are on but not connected to a Bluetooth device. Low battery level. Battery is fully charged. The blue LED flashes quickly. If no connection can be made, the headphones will turn itself off within 5 minutes. The white LED flashes 3 times for every 10 seconds until it is out of power. White LED is off. To disconnect from headphone B, double click the Music/call button. To disconnect from headphone A, double click the Music/call button.
5 Technical data • • • • • • • • Up to 7.5 hours of music time or 6 hours of talk time Up to 170 hours of standby time Normal time for a full charge: 2 hours Rechargeable lithium polymer battery (125 mAh) Bluetooth 4.
6 Notice Declaration of conformity Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c.philips. com. Disposal of your old product and battery household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.
Trademarks Bluetooth The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations is under license.
7 Frequently asked questions My Bluetooth headphones do not switch on. The battery level is low. Charge the headphones. I cannot pair my Bluetooth headphones with a mobile phone. The Bluetooth is disabled. Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headphones. Pairing does not work. Make sure the headphones are in pairing mode. • Follow the steps described in this user manual (see 'Pair the headphones with your mobile phone' on page 4).
2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. UM_SHB5900_00_EN_V1.