SHB6110 www.philips.
Table of contents 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 2 Important Hearing safety Electric-, Magnetic- and Electromagnetic Fields (“EMF”) General maintenance Disposal of your old product Remove the integrated battery Notice for the European Union Trademarks in the box need 3 3 3 4 4 4 5 5 6 6 3 What else 4 What you can do with your headset 6 5 Overview of your Bluetooth stereo headset 7 6 6.1 6.
Important 1.1 Hearing safety Danger To avoid hearing damage limit the time you use the headphones at high volume and set the volume to a safe level. The louder the volume the shorter is the safe listening time. Be sure to observe the following guidelines when using your headphones. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts. • Do not turn up the volume so high that you can’t hear what’s around you.
1.3 General maintenance 1.5 Remove the integrated battery To avoid damage or malfunction: • Do not expose the headset to excessive heat. • Do not drop your headset. • Do not allow your headset to be submerged in water. • Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives. If cleaning is required use a soft cloth, if necessary dampened with a minimum amount of water or diluted mild soap, to clean the product.
Notice for the European Union ENGLISH 1.6 Hereby, Philips Consumer Lifestyle, BU Accessories, declares that this Philips Bluetooth headset SHB6110 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. 1.7 Trademarks Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Koninklijke Philips Electronics N.V.
2 What’s in the box: Bluetooth headset 3 What else you’ll need: A mobile phone that is capable of Bluetooth stereo streaming, i.e. that is compatible with the Bluetooth A2DP profile. Other devices (Notebooks, PDA’s, Bluetooth adapters, MP3 players etc.) are also compatible if they share the Bluetooth profiles supported by the headset. These profiles are: For wireless handsfree communication: • The Bluetooth headset profile (HSP) or the Bluetooth Handsfree profile (HFP).
Overview of your Bluetooth stereo headset VOL – ENGLISH 5 VOL + Charging socket OptiFit ear loop adjustment LED indicator light Microphone
6 Get started 6.1 Charge your headset Before you use your headset for the first time, charge the battery for 6 hours for optimum battery capacity and lifetime. Warning Use only the original USB charging cable. Using another charger may damage or destroy your headset. Plug the USB charging cable into your computer’s USB socket and connect the charger cable to the headset’s charging socket.
1 2 ENGLISH To pair your headset with your mobile phone Make sure the headset is charged, your mobile phone is turned on and its Bluetooth feature is enabled. Check your phones user guide to learn how to turn on Bluetooth on your phone. With the headset turned off, press until the LED starts blinking red and blue alternately. The headset will remain in “pairing mode” for 5 minutes. Pairing typically involves a few simple steps outlined below, please check your phones user guide for details.
7 Using your Bluetooth stereo headset 7.1 Connecting to your mobile phone Turn on the headset by pressing until the LED lights up. Once turned on the headset will reconnect automatically to the last device it was connected with. If the last connected device is not available the headset tries to reconnect to the penultimate device that was connected to the headset.
The table below shows how to operate your headset: Do this: Enter pairing mode Press until the LED starts blinking red / blue alternately Press for 2 seconds Turn headset on Turn headset off Play / Pause music Stop music Skip Fwd/Bwd FullSound on / off Hold for min. 4 sec Tap Tap and simultaneously Tap or Hold and simultaneously for 4 sec.
7.4 Wearing your Bluetooth stereo headset The OptiFit neckband features an ergonomically optimized hinge, carefully placed in the center of the ear shell for optimum wearing comfort. This optimized fit also results in ideal sound performance due to perfect speaker placement over your ear canal. To personalize the fit of your headset set the ear loops to the largest position marked with .
Using more of your Bluetooth stereo headset 8.1 Learn about the battery status Immediately after turning the headset on, the LED will indicate the battery status. LED behaviour Battery status 3x red blinking Less than 25% battery remaining 2x red blinking Less than 50% of charge remaining 1x blue blinking 50% or more of charge remaining The LED will continuously flash red with about 5 minutes of talk time remaining.
9 • • • • • • • • Technical data Up to 14 hours of playtime or talk time Up to 300 hours of standby time Typical time for a full charge: 3.5 hours Rechargeable Lithium-Polymer battery (360mAh) Bluetooth 2.
Frequently asked questions Bluetooth headset does not switch on. Battery is very low. Charge your Bluetooth headset. No connection to mobile phone. Bluetooth disabled. Enable Bluetooth on your mobile phone and turn the headset on after turning on the phone. Mobile phone cannot find headset • The headset may be connected to another previously paired device Turn the currently connected device off or move it out of range.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.