SHB6111 www.philips.
Table of contents 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Important Hearing safety Electric-, Magnetic- and Electromagnetic Fields (“EMF”) General maintenance Disposal of your old product Remove the integrated battery Notice for the European Union Trademarks 3 3 3 4 4 4 5 5 9 9.1 9.2 10 Wearing your Bluetooth stereo headset 15 11.3 11.
Important 1.1 Hearing safety Danger To avoid hearing damage limit the time you use the headphones at high volume and set the volume to a safe level. The louder the volume the shorter is the safe listening time. Be sure to observe the following guidelines when using your headphones. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts. • Do not turn up the volume so high that you can’t hear what’s around you.
1.3 General maintenance 1.5 Remove the integrated battery To avoid damage or malfunction: • Do not expose the headset to excessive heat. • Do not drop your headset. • Do not allow your headset to be submerged in water. • Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives. If cleaning is required use a soft cloth, if necessary dampened with a minimum amount of water or diluted mild soap, to clean the product.
Notice for the European Union ENGLISH 1.6 Hereby, Philips Consumer Lifestyle, BG P&A, declares that this Philips Bluetooth headset SHB6111 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Check the root folder of your user manual CD or an addendum sheet for the Declaration of Conformity. 1.7 Trademarks Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
2 What’s in the box: Bluetooth headset USB charging cable CD with user manual 3 What else you’ll need: For use with a mobile phone: A mobile phone that is capable of Bluetooth stereo streaming, i.e. that is compatible with the Bluetooth A2DP profile. For use with the Bluetooth music / voice dongle: • A PC with an available USB port Quick start guide Bluetooth music / voice adapter For wireless handsfree communication: • The Bluetooth headset profile (HSP) or the Bluetooth Handsfree profile (HFP).
What you can do with your ENGLISH 4 headset and Bluetooth music / voice adapter With your Philips headset you can: • Lead wireless hands-free conversations • Wirelessly listen to music • Wirelessly control music • Switch between calls and music With your Philips USB Bluetooth music / voice adapter you can: • Enable compatible PC’s with Bluetooth wireless technology for music listening and VoIP communication.
5 Overview of your Bluetooth stereo headset and USB Bluetooth music / voice adapter Bluetooth stereo headset VOL – VOL + Charging socket OptiFit ear loop adjustment LED indicator light Microphone Bluetooth music / voice adapter LED, Pair & Connect button
Install and configure the USB Bluetooth music / voice adapter No separate software is required to install the Bluetooth music / voice adapter as it is preinstalled on the adapter. Locate a free USB port on your computer and insert the Bluetooth music / voice adapter. Windows will recognize it and display that if found new hardware. If you are prompted for a device driver, please select “Install the software automatically” and restart your PC if required.
7 Get started 7.1 Charge your headset Before you use your headset for the first time, charge the battery for 6 hours for optimum battery capacity and lifetime. Warning Use only the original USB charging cable. Using another charger may damage or destroy your headset. Plug the USB charging cable into your computers USB socket and connect the charger cable to the headsets charging socket.
Pair your headset with your mobile phone Make sure the headset is charged, your mobile phone is turned on and its Bluetooth feature is enabled. Check your phones user guide to learn how to turn on Bluetooth on your phone. 1 2 3 4 ENGLISH 7.2.2 With the headset turned off, press until the LED starts blinking red and blue alternately. The headset will remain in “pairing mode” for 5 minutes. Pairing typically involves a few simple steps outlined below, please check your phones user guide for details.
Using your headset with ENGLISH 9 your mobile phone 9.1 Connecting to your mobile phone Turn on the headset by pressing until the LED lights up. Once turned on the headset will reconnect automatically to the last device it was connected with. If the last connected device is not available the headset tries to reconnect to the penultimate device that was connected to the headset.
The table below shows how to operate your headset: In order to: Do this: Enter pairing mode Press until the LED starts blinking red / blue alternately Press for 2 seconds Turn headset on Turn headset off Play / Pause music Stop music Skip Fwd / Bwd FullSound on / off Adjust volume Pick up a call / End a call Reject a call Redial the last number Activate voice dialing* Mute Mic Hold for min. 4 sec Tap and simultaneously Tap or Tap Hold and simultaneously for 4 sec.
Wearing your Bluetooth stereo headset The OptiFit neckband features an ergonomically optimized hinge, carefully placed in the center of the ear shell for optimum wearing comfort. This optimized fit also results in ideal sound performance due to perfect speaker placement over your ear canal. To personalize the fit of your headset set the ear loops to the largest position marked with . Pick up the headset with both hands with the microphone facing forward and lower the headset on your ears.
11.2 Learn about simultaneous use for voice and audio Your Bluetooth stereo headset can connect to • one Bluetooth audio device (supporting the A2DP and AVRCP Bluetooth profile) and • one Bluetooth communication device (supporting HFP or HSP Bluetooth profile) at the same time.
• • • • • • • • Technical data ENGLISH 12 Up to 14 hours of playtime or talk time Up to 300 hours of standby time Typical time for a full charge: <4 hours Rechargeable Lithium-Polymer battery (360mAh) Headset: Bluetooth 2.0+EDR, Bluetooth music / voice adapter: Bluetooth 1.2 Profile support: Bluetooth stereo (A2DP – Advanced Audio Distribution Profile), Audio Video Remote Control Profile (AVRCP), Headset (HSP) and Handsfree Profile (HSP).
13 Frequently asked questions Bluetooth headset does not switch on. Battery is very low. Charge your Bluetooth headset. No connection to mobile phone. Bluetooth disabled. Enable Bluetooth on your mobile phone and turn the headset on after turning on the phone. Mobile phone cannot find headset. • The headset may be connected to another previously paired device. Turn the currently connected device off or move it out of range.
2008 © Koninklijke Philips Electronics N.V. All rights reserved.
