Philips Tapster SHB7110 www.philips.
Table of contents 1 Welcome 3 8 2 2.1 2.2 4 4 8.1 8.2 4 5 5 6 6 6 8.3 2.3 2.4 2.5 2.6 2.7 Important Hearing safety Electric-, Magnetic- and Electromagnetic Fields (“EMF”) General maintenance Disposal of your old product Notes for battery disposal Notes on certification and approbation Trademarks 3 3.1 in the box What else you’ll need 7 7 4 What you can do with your Philips Tapster Bluetooth stereo headset 8 Overview of your Philips Tapster Bluetooth stereo headset 9 5 6 6.1 6.2 6.3 7 7.
Welcome ENG L ISH 1 With the intuitive simplicity of your Philips Tapster Bluetooth stereo headset with touch and gesture controls nothing gets between you and your music. Let FullSound enhancement amaze you with rich and lively music. EverClear technology minimizes echo and background noise for clear conversations. Angled Acoustics design leads to a snug fit of the headset for optimum comfort and a perfect acoustic seal for a great sound experience.
2 Important 2.2 1 2.1 Hearing safety Danger To avoid hearing damage limit the time you use the headphones at high volume and set the volume to a safe level. The louder the volume the shorter is the safe listening time. Be sure to observe the following guidelines when using your headphones. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts.
General maintenance To avoid damage or malfunction: • Do not expose the headset to excessive heat. • Do not drop your headset. • Apparatus shall not be exposed to dripping or splashing. • Do not allow your headset to be submerged in water. • Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives. • The main plug of AC/DC adapter is used as the disconnect device, the disconnect device shall be readily operable.
2.5 Notes for battery disposal If in your country there is no collection / recycling system for electronic products you can protect the environment by removing the battery before disposing the headset.Your product contains a built-in rechargeable battery covered by the European Directive 2006/66/ EC, which cannot be disposed of with normal household waste. Take your product to an official collection point or service centre where a professional can remove the battery.
What’s in the box: Philips Tapster Bluetooth stereo headset SHB7110 ENG L ISH 3 Carrying Case Exchangeable rubber ear caps Optional earhooks SHB7110 Quick Start Guide 3.1 User manual on CD AC Charger (100-240V) Exchangeable Charging Pins What else you’ll need A mobile phone that is capable of Bluetooth stereo streaming, i.e. that is compatible with the Bluetooth A2DP profile. Other devices (Notebooks, PDA’s, Bluetooth adapters, MP3 players etc.
4 What you can do with your Philips Tapster Bluetooth stereo headset With your Philips Tapster Bluetooth stereo headset you can: • Lead wireless hands-free conversations • Wirelessly listen to music • Wirelessly control music • Switch between calls and music 8
Overview of your Philips Tapster Bluetooth stereo headset LED indicator light Exchangeable rubber ear cap On/Off Microphone Left earpiece Right earpiece Touch sensitive area Touch sensitive area Charging socket Left earpiece Right earpiece 9 ENG L ISH 5
6 Get started 6.1 Charge your headset Caution Finish your call before charging the headset, as connecting the headset for charging will cut an ongoing call. During charging you can operate the headset normally. Before you use your headset for the first time, charge the battery for 6 hours for optimum battery capacity and life time. Plug the charger into a wall outlet and connect the charger cable to the headsets charging socket.
Pair your Philips Tapster Bluetooth stereo headset with your mobile phone Your Philips Tapster Bluetooth stereo headset must be paired to your mobile phone before connecting and using it for the first time with your phone. “Pairing” will establish a unique encrypted link between your mobile phone and your headset. Pairing has to be done only once, before using your headset with your mobile phone or another Bluetooth device for the very first time.
Please enter the headsets passcode “0000” (four zeros). After successful pairing, the headset will connect to the mobile phone.You will hear a long beep to confirm successful pairing and the headsets LED will change from flashing red/blue to periodically flashing blue every three seconds. 6.3 1 Optional: For an extra-secure sports fit, attach the earhook. B A Fitting your headset Select your cap size for the best find and optimum sound performance.
Using your touch sensitive Philips Tapster Bluetooth stereo headset 7.1 Connect your Philips Tapster Bluetooth stereo headset to your mobile phone Tip To avoid accidental activation of music or calls the touch sensitive areas of the headset are only enabled after you inserted the headset in your ears.You will hear an ascending activation and descending de-activation tone when inserting or removing your Philips Tapster Bluetooth stereo headset. The whole outer shell of the earpieces is touch sensitive.
The table below shows how to control your music and calls with these basic motions. Tip You will find that all of the call functions are located on the right earpiece so you can use the headset for calls even if the left earpiece is not in your ear.
Storing and carrying your headset ENG L ISH 7.4 Your headset comes with a protective carrying case for the headset and the optional earhooks. Wind the cable that connects the two earpieces in the cable groove to neatly store the headset.
8 Using more of your Philips Tapster Bluetooth stereo headset 8.1 Learn about simultaneous use for voice and audio Your Bluetooth stereo headset can connect to one Bluetooth audio source (supporting the A2DP and AVRCP Bluetooth profile) and one Bluetooth communication source (supporting HFP or HSP Bluetooth profile) at the same time. Learn about the battery status Immediately after turning the headset on, the LED will indicate the battery status.
Learn about FullSound ENG L ISH 8.3 FullSound is a smart digital sound enhancement algorithm, which runs on a powerful processor inside your Bluetooth headset. It restores and enhances bass, treble, stereo effects and dynamics of compressed music and leads to a more natural, “real life” sound experience based on years of acoustic research and tuning.
9 Technical data for your Philips Tapster Bluetooth stereo headset • Intuitive touch and gesture sensitive controls • FullSound digital sound enhancement for rich, lively music • EverClear echo and noise reduction for clear calls • Angled acoustics ergonomic design • Up to 6 hours of music playback time • Up to 7 hours of talk time • Up to 150 hours of standby time • Typical time for a full charge: 2 hours • Rechargeable Lithium-Polymer battery (160mAh) • Bluetooth 2.
Frequently asked questions Bluetooth headset does not switch on. Battery is very low. Charge your Bluetooth headset. Mobile phone cannot find headset. • The headset may be connected to another previously paired device. Turn the currently connected device off or move it out of range. • Pairings may have been reset or headset has been previously paired with other device. Start the pairing process as described in this user manual. No connection to mobile phone. Bluetooth disabled.
Audio quality is poor and crackling noises can be heard. Bluetooth audio source is out of range. Reduce the distance between the headset and the Bluetooth audio source, or remove obstacles between them. I hear but cannot control the music on my device (e.g. skip forward / backward). The music device does not support this feature (AVRCP profile). Check the user manual of your audio source. Please visit www.philips.com/support for additional support.
2009 © Koninklijke Philips Electronics N.V. All rights reserved.