Always there to help you Register your product and get support at www.philips.
Contents 1 Important safety instructions Hearing Safety General information Compliance with EMF 2 Your Bluetooth stereo headset What's in the box Other devices Overview of your Bluetooth stereo headset 2 2 2 2 3 3 3 4 3 Get started 5 Charge your headset 5 Pair the headset with your mobile phone 5 4 Use your headset Connect the headset to a Bluetooth device Manage your calls and music Wear your headset Use with the audio cable 5 Technical data 6 Notice Declaration of conformity Disposal of your old
1 Important safety instructions Caution •• Do not expose the headset to excessive heat. •• Do not drop your headset. •• Headset shall not be exposed to dripping or splashing. •• Do not allow your headset to be submerged in water. •• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives.
2 Your Bluetooth stereo headset Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips wireless on-ear headset, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music; • enjoy music on non-Bluetooth devices with an audio cable. Quick start guide Other devices A mobile phone or device (e.g.
Overview of your Bluetooth stereo headset a Microphone b Call/Music button c Audio input jack d Volume/Track control e Charging slot 4 EN
3 Get started There are two ways to pair your headset with your mobile phone: • Manual pairing • NFC pairing Charge your headset Manual pairing Note •• Before you use your headset for the first time, charge the battery for 4 hours for optimum battery capacity and lifetime. •• Use only the original USB charging cable to avoid any damage. •• Finish your call before charging the headset, as connecting the headset for charging will power the headset off.
The following example shows you how to pair the headset with your mobile phone. 1 2 Activate the Bluetooth feature of your mobile phone, select Philips SHB7150. Enter the headset password "0000" (4 zeros) if prompted. For those mobile phones featuring Bluetooth 3.0 or higher, no need to enter a password.
4 Use your headset Connect the headset to a Bluetooth device 1 Turn on your mobile phone/Bluetooth device. 2 Press and hold to turn the headset on. »» The blue LED flashes. »» The headset is reconnected to the last connected mobile phone/ Bluetooth device automatically. If the last one is not available, the headset tries to reconnect to the second last connected device.
Wear your headset Adjust the headband to fit your head. Use with the audio cable Note •• Make sure that you turn off the Bluetooth headset before connecting the audio cable. With the supplied audio cable, you can use the headset with non-Bluetooth devices or on airplane. No battery power is required for the headset when you use it with the audio cable. Connect the supplied audio cable to • the headset and; • an external audio device.
5 Technical data • • • • • • • • • Minimum 9 hours of music time or talk time Minimum 200 hours of standby time Normal time for a full charge: 3 hours Rechargeable Lithium-Polymer battery (200 mAh) 3.5 mm audio jack for corded headset mode Bluetooth 3.
6 Notice negative consequences for the environment and human health. Declaration of conformity Remove the integrated battery Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c.philips. com. Disposal of your old product and batteries Note •• Make sure the headset is disconnected from the USB charging cable before removing the battery.
Notice for the European Union 0168 Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Trademarks 2016 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product.
7 Frequently asked questions My Bluetooth headset is connected to a Bluetooth stereo enabled mobile phone, but music only plays on the mobile phone speaker. Refer to the user manual of your mobile phone. Select to listen to music through the headset. My Bluetooth headset does not switch on. The battery level is low. Charge the headset. The audio quality is poor and crackling noise can be heard. The Bluetooth device is out of range.
2016 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. SHB7150_UM_EN_V2.