Always there to help you Register your product and get support at www.philips.
Contents 1 Important safety instructions Hearing Safety General information 2 Your noise canceling on-ear Bluetooth headphones What's in the box Other devices Overview of your noise canceling Bluetooth headphones 3 Get started Charge the battery Pair the headphones with your mobile phone 4 Use your headphones Connect to Bluetooth Connect to ANC (active noise cancelation) Connect to airline audio systems Wear your headphones 5 Technical data 2 2 2 3 3 3 3 5 5 5 7 7 8 8 9 10 6 Notice 11 Declaration
1 Important safety instructions General information To avoid damage or malfunction: Caution Hearing Safety •• Do not expose headphones to excessive heat. •• Do not drop your headphones. •• Headphones shall not be exposed to dripping or splashing. •• Do not allow your headphones to be submerged in water. •• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives.
2 Your noise canceling onear Bluetooth headphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. What's in the box Airline adapter Quick start guide Other devices A mobile phone or device (e.g. notebook, PDA, Bluetooth adapters, MP3 players etc) which supports Bluetooth and is compatible to the headphones (see 'Technical data' on page 10).
b Music/Call control button c Audio jack d LED indicator e Power button f Microphone g / Pairing/Mute button h Volume/track control button i NFC detection area j Active noise canceling (ANC) on/off button k Active noise canceling (ANC) LED indicator 4 EN
3 Get started 2 Charge the battery Note •• Before you use your headphones for the first time, charge the battery for 5 hours for optimum battery capacity and lifetime. •• Use only the original USB charging cable to avoid any damage. •• You can operate the headphones normally during charging. •• Normally, a full charge takes 2 hours. •• When the battery level is low, the white LED will flash.
phones featuring Bluetooth 3.0 or higher, no need to enter a password.
4 Use your headphones Turn the headphones off. Connect to Bluetooth Music control Connect the headphones to a Bluetooth device 1 2 Turn on your mobile phone/Bluetooth device. Task Play or pause music. Adjust volume. Press and hold to turn the headphones on. »» The blue LED flashes. Skip forward. »» The headphones are reconnected to the last connected mobile phone/ Bluetooth device automatically. Skip backward. Press and hold for 4 seconds. »» The white LED is on and fades out.
LED indicator status (right side of headphones) Headphones status The headphones are connected to a Bluetooth device, while the headphones in standby mode or while you are listening to music. The headphones are ready for pairing. The headphones are on but not connected to a Bluetooth device. Low battery. Battery is fully charged. Tip •• When the ANC function is not required, switch off the ANC on/off button to continue your call or listening to music. Indicator The blue LED flashes for every 8 seconds.
Wear your headphones Adjust the headband to fit your head. Tip •• After use, twist the headphones for easy storage.
5 Technical data • • • • • • • • • • • • • Music time (ANC enabled with Bluetooth): 16 hours Talk time (ANC enabled with Bluetooth): 15 hours Standby time (ANC enabled with Bluetooth): 45 hours Music and talk time: Unlimited (with audio cable connected) Normal time for a full charge: 2 hours Rechargeable Lithium-Polymer battery (530 mAh) 3.5 mm audio jack for corded headphones mode Bluetooth 4.
6 Notice Declaration of conformity Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c.philips. com. Disposal of your old product and battery household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.
Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license. Other trademarks and trade names are those of their respective owners. Siri Siri is a trademark of Apple Inc., registered in the U.S. and other countries. Google Google and the Google Logo are registered trademarks of Google Inc. N-Mark The N-Mark is a trademark or registered trademark of NFC Forum, Inc.
7 Frequently asked questions My Bluetooth headphones do not switch on. The battery level is low. Charge the headphones. I cannot pair my Bluetooth headphones with a mobile phone. The Bluetooth is disabled. Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headphones. Pairing does not work. Make sure the headphones are in pairing mode. • Follow the steps described in this user manual (see 'Pair the headphones with your mobile phone' on page 5).
2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. UM_SHB8850NC_00_EN_V1.