SHB9000 www.philips.
Sommaire 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Important Sécurité de l’audition Champs électriques-, Magnétiques- et électromagnétiques (“EMF”) Entretien général Comment jeter votre produit en fin de vie Comment jeter la pile intégrée Remarques pour l’Union européenne Marques déposées 3 3 3 4 4 4 5 5 2 6 3 Ce dont vous avez besoin 6 4 Ce que vous pouvez faire avec votre casque 6 5 Présentation de votre casque stéréo Bluetooth 7 6 Mise en route 6.1 Charger votre casque 6.
Important 1.2 Champs électriques-, Magnétiques et électromagnétiques ( EMF ) 1 1.1 Danger Pour éviter tout dommage sur l’audition, limitez le temps d’utilisation avec le casque à un fort volume, réglez le volume à un niveau convenable. Plus le volume est fort, lus vous devrez écourter le temps d’écoute. Assurez-vous de respecter les directives suivantes lors de l’utilisation des écouteurs. • Ecoutez la musique à un volume adapté durant une période raisonnable.
1.3 Entretien général 1.5 Comment jeter la pile intégrée Pour éviter tout dommage ou dysfonctionnement : • N’exposez pas le casque à une chaleur excessive. • Ne faîtes pas tomber votre casque. • N’immergez pas votre casque dans l’eau. • N’utilisez aucun agent nettoyant contenant de l’alcool, de l’ammoniaque, de l’essence ou des substances abrasives. Si un nettoyage est nécessaire, essuyez le produit avec un chiffon doux.
FR A NÇAIS 1.6 Par la présente, Philips Consumer Electronics, BG P&A, déclare que l’appareil Philips Blutooth headset SHB9000 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Vérifiez le dossier racine de votre CD du manuel d’utilisation ou la feuille supplémentaire de la déclaration de conformité. 1.7 Marques déposées Les marques déposées appartiennent à Koninklijke Philips Electronics N.V ou leur propriétaire respectif.
2 Contenu de l’emballage: SHB9000 Chargeur Casque Bluetooth Guide de démarrage rapide Sacoche 3 D’autres appareils (Ordinateurs portables, PDA, adaptateurs Bluetooth, lecteurs MP3 etc.) sont aussi compatibles s’ils partagent des profils Bluetooth supportés par le casque. Ces profils sont: Pour une communication sans fil et en mains libres: • Le profil du casque Bluetooth (HSP) ou le profil mains libres Bluetooth (HFP).
Présentation de votre casque stéréo Bluetooth FR A NÇAIS 5 Indicateur lumineux LED Bande d’encolure Microphone Prise audio Mini prise USB de charge
6 Mise en route 6.1 Charger votre casque Avant d’utiliser votre casque la première fois, chargez la pile durant 6 heures pour optimaliser la capacité de la pile et sa durée de vie. Avertissement Utilisez uniquement le chargeur original (5V, 500mA). L’utilisation d’un autre chargeur pourrait endommager ou détruire votre casque. Branchez le chargeur à une prise d’alimentation électrique et connectez le câble du chargeur à la prise du casque.
1 2 FR A NÇAIS Pour apparier votre casque avec votre téléphone portable Assurez-vous que le casque soit chargé, que votre téléphone portable soit mis en marche et que sa fonction Bluetooth soit activée. Consultez le manuel d’utilisation de votre téléphone portable pour activer la fonction Bluetooth. Lorsque le casque est éteint, appuyez sur jusqu’à ce que l’indicateur LED commence à clignoter en rouge et bleu alternativement. Le casque restera en “mode d’appariement” durant 5 minutes.
7 Utiliser votre casque stéréo Bluetooth 7.1 Connecter le casque à votre téléphone portable Mettez le casque en marche en appuyant sur jusqu’à ce que l’indicateur LED s’allume. Une fois mis en marche, le casque se reconnectera automatiquement au dernier appareil auquel il était connecté. Si le dernier appareil connecté n’est pas disponible, le casque essaye de reconnecter l’appareil ayant été connecté précédemment.
Indicateurs d’autres statuts: Connecté à un appareil Bluetooth L’indicateur bleu clignote toutes les 3 secondes. (en mode de veille ou en écoute musicale) Prêt pour l’appariement En mode d’appariement, l’indicateur LED clignote de maniere continue en alternant les couleurs bleue et rouge. En marche mais non connecté L’indicateur bleu clignote rapidement. En conversation Lorsque le téléphone sonne, l’indicateur bleu clignote rapidement (deux fois par seconde).
7.4 Porter votre casque stéréo Bluetooth Le bandeau d’encolure est entièrement ajustable pour personnaliser le maintien désiré. Les doux coussinets en mousse fournissent un scellage sonore et un confort d’écoute de longue durée. Vous pouvez tourner l’oreillette sur sa charnière pour écouter la musique d’une oreille lors de travaux de mixage et de contrôle DJ. Pliez le casque à plat en tournant les deux oreillettes et rangez-le en l’insérant dans la sacoche de voyage pour le transporter.
Autres informations sur votre casque stéréo Bluetooth 8.1 Utiliser le casque avec le câble audio Vous pouvez utiliser votre casque avec des appareils non équipés du système Bluetooth ou dans un avion (dans lequel l’utilisation du système Bluetooth peut être interdite) en utilisant la prise audio du casque. Le fonctionnement avec fil ne nécessite pas l’alimentation de la pile pour écouter votre musique.
8.3 A propos de l’utilisation simultanée vocale et audio Votre casque stéréo Bluetooth peut être connecté à • un appareil audio Bluetooth (supportant le profil Bluetooth A2DP et AVRCP) et • un appareil de communication Bluetooth (supportant le profil Bluetooth HFP ou HSP) en même temps. Cependant vous pouvez connecter votre casque stéréo Bluetooth.
Données techniques FR A NÇAIS 9 • Jusqu’à 17 heures de lecture musicale ou 18 heures de conversation • Jusqu’à 400 heures de veille • Durée normale pour une charge complète: 4 heures et demie • Pile polymère lithium rechargeable (460mAH) • Supporte Bluetooth 2.0+EDR, Bluetooth stéréo (A2DP – Profil de distribution audio avancé, AVRCP – Profil de télécommande audio vidéo), supporte le mono Bluetooth (HSP – Profil casque, HFP – Profil mains libres).
10 Questions fréquemment posées Le casque Bluetooth ne se met pas en marche. La pile est faible. Chargez votre casque Bluetooth. Le casque Bluetooth ne se met pas en marche. Le câble audio est connecté. Débranchez le câble audio La connexion ne pas avec le téléphone portable. Le système Bluetooth est désactivé. Activez la fonction Bluetooth sur votre téléphone portable et mettez le casque en marche après avoir mis en marche le téléphone. Le téléphone portable ne détecte pas le casque.
2008 © Koninklijke Philips Electronics N.V. Reproduction interdite.