E9015ED_EN.qx3 03.7.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 2 General Information English The region code for this set is 2. Since it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes and discs can have an optional region code. If you load a disc of a different region code to your player, you will see the region code notice on the screen.The disc will not playback, and should be unloaded. 2 Manufactured under license from Dolby Laboratories.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 3 General Information Environmental Information. . Supplied Accessories . . . . . . . Safety Information. . . . . . . . . Symbols Used in this Manual Functional Overview Front Panel . . . . . . . . Display Message . . . . . Rear Panel . . . . . . . . . Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E9015ED_EN.qx3 03.7.29 6:32 PM Page 4 Functional Overview English Front Panel 1 20. 2 3 4 5 22. STOP/EJECT OPEN CLOSE STANDBY-ON SOURCE DVD VCR DIRECT TUNER DUBBING PLAY TIMER REC STOP RECORD PLAY HEADPHONE VIDEO AUDIO JAZZ CLASSIC POP OPTIMAL VOL IR SURR 18 17 161514 13 12 11 10 9 8 21. 23. 7 6 19 24. 25. 26. 202122 23 24 25 26 27 28 29 30 31 32 33 34 3536 1. Disc Tray (DVD) insert a disc here 2. OPEN/CLOSE A button (DVD) to open/close the disc tray 3.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 5 Rear Panel 1 2 3 AV2 (DECODER) FL MW VCR DVD/VCR FR C AERIAL TV ANTENNA ANTENNA 75Ω RF OUT ANTENNA 75Ω AV1(TV) SL SR FM (75Ω) W DIGITAL AUDIO OUT S-VIDEO OUT COAXIAL 456 7 SPEAKER (4Ω) 8 9 10 11 1. AV1 (TV) jack connect SCART cable to a TV 2. AV2 (DECODER) jack (VCR only) connect SCART cable from another DVD/VCR, camcoder or an audio/video source 3. MW antenna jack connect the supplied MW antenna to the MW jack 4.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 6 Functional Overview Basic Connections 1 2 3 4 1 2 • Please refer to the instruction books of your TV,VCR, Stereo System or other devices as necessary to make the best connections. • Make one of the following connections, depending on the capabilities of your existing equipment. The following guidelines are options for the best picture and sound quality available on your System.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 7 Setting Up your System Antenna Connections MW Antenna English If your TV is not equipped with a SCART input, you can select the following connection: If your TV has a S-Video input connector, 1 Connect the antenna or cable to the AERIAL of your System. 2 Connect the S-Video out on the System to the S-Video in on the TV. 3 Connect the COAXIAL (Digital audio out) on the System to the Coaxial jack on the TV.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 8 Setting Up your System English 1 2 3 4 Setting up Surround Sound Using the Remote Control Connect all the speakers and set up the System properly in order to enjoy the Home Cinema experience. Place the FRONT Left and Right speakers at equal distances from the TV and at a 45-degree angle from the listening position. Place the CENTER speaker above or below the TV to localize the sound.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 9 Video Channel Setting 1 2 3 4 5 6 7 8 1 2 3 4 Video channel setting will be necessary, if your System is connected to the TV via the coaxial cable. Insert a pre-recorded tape into the System.The System will turn on and start playback automatically.If playback does not start, press PLAY B . Select and adjust your TV to channel 36. • If the playback picture appears on the TV screen, continue with step 8.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 10 Setting Up your System English Sorting and clearing TV channels manually After you have performed the automatic channel search you may not agree with the sequence in which the individual TV channels have been allocated to the programme positions (programme numbers) of the System.You can use this function to individually sort the TV channels already saved or to delete unwanted TV channels or those with poor reception.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 11 Playing cassettes 1 2 3 4 You can use this System to play back recorded VHS videocassettes.You can operate the System using the remote control or the buttons on the front of the System. If you press PLAY, STOP, FF or REW while the set is in Standby, the power will be automatically turned on. Additionally, if a cassette was already inserted, the corresponding operation will be performed. Your System can only record and play standard VHS cassettes.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 12 VCR Manual Recording English General information Use 'Manual Recording' to make a spontaneous recording (for example, a programme currently being shown). If you want to start and stop a recording manually, read the section 'Recording without automatic switch-off'. Read the section 'Direct Record' if you want to record a programme currently being shown.
03.7.29 6:32 PM Page 13 VCR Manual Recording 1 2 3 4 5 6 7 Programming a Recording (TIMER) Direct dubbing General information Follow the steps below to copy a DVD or video disc to a videotape.This will be possible only if the DVD is not copy protected. Put a videotape in the cassette compartment. Make sure the tape’s record tab is intact and the tape is long enough to record the disc. Press VCR. Select the recording speed. Details are at “Selecting the recording speed (SP or LP)”.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 14 Programming a Recording (TIMER) English 5 The decoded data appears after confirmation.You can go back to change the data. Select the corresponding input field using B or CLEAR. Change the data with numerical key pads. 6 When all inputs are correct, press DISPLAY/STATUS/EXIT.The programming information is stored in a Timer block. Switching on 'VPS/PDC' in the 'START' input field Select 'VPS/PDC' using B or CLEAR.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 15 Switching the status display off or on 1 2 3 4 5 • During playback of the recorded tape in Hi-Fi mode: Blue Background on or off 3 4 5 If you want the TV screen to be solid blue when a weak signal is received, set BLUE BACKGROUND to ‘ON’.The screen will be blue and the sound will be muted. Or, if you want to receive the weak signal, set BLUE BACKGROUND to ‘OFF’. Press VCR, then DISC/VCR MENU. Press K/L to select 'VCR SET UP' SELECT K L CHOOSE B , then press B.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 16 Playing a Disc English Basic Playback 1 2 3 4 DVD-V CD Title Menu VCD Getting Started Turn on the power of the TV, amplifier and any other components which are connected to the DVD system. Make sure the TV and audio receiver (commercially available) are set to the correct channel. Press STANDBY-ONy. Press DVD, then OPEN/CLOSE A to open disc loading tray. Place the chosen disc in the tray, with the label facing up. Press PLAY B.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 17 Playing a Disc 1 2 3 4 DVD-V Repeat VCD The Zoom function allows you to enlarge the video image and to pan through the enlarged image. Press ZOOM during playback. • Playback will continue. Press ZOOM repeatedly to select the required zoom factor: x2, x4 or OFF. Use Arrow ( L / K / B / s )to move the zoomed picture across the screen. To exit zoom mode, press ZOOM to OFF. Notes: - Zooming function does not work while disc menu is shown.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 18 Playing a Disc English Program On-Screen Information CD You may determine the order in which tracks will play. 1 In stop mode press MODE/SYSTEM. • The PROGRAM screen will appear. 2 Press ▲ or ▼ to select a track, then press OK. TOTAL • Press CLEAR to erase the most recently entered program. 3 Press PLAY B to play the programmed tracks. Notes: - While the program is being played back, the STOP C works as follows.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 19 Subtitle Language The DVD system allows you to select a language for subtitle during DVD disc (if available) playback. 1 Press DVD, then SUBTITLE during playback. 2 Press SUBTITLE repeatedly to select your desired subtitle language. • The selected language will be displayed on the display bar at the top of the screen. 3 To turn off subtitles, press SUBTITLE repeatedly until OFF appears. Notes: - Some discs allow subtitle language setting on the disc menu.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 20 DVD Setup English Audio Setting Speaker Balance Choose the appropriate Audio settings for your equipment as it only affect during the playback of DVD discs of the DVD system. 1 Press SYSTEM MENU/PROG in STOP mode. 2 Press B to select CUSTOM, then press OK. • CUSTOM mode will appear. 3 Press s or B to select AUDIO, then OK to confirm. 4 Press K or L to select the below items, then press OK. DRC (Dynamic Range Control) : To compress the range of sound volume.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 21 DVD Setup DVD-V English Display Setting Use markers to memorise your favourite places on a disc. 1 Press SYSTEM MENU/PROG in STOP mode. 2 Press B to select CUSTOM, then press OK. • CUSTOM mode will appear. 3 Press s or B to select DISPLAY, then OK to confirm. 4 Press K or L to select the below items, then press OK. TV ASPECT : QUICK Press K or L for an item selection, then press OK. Select 4:3 LETTER BOX for a black bars appears on top and bottom of the screen.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 22 FM/MW Radio English Selecting Radio Station 1 Press TUNER to select Tuner mode. • The red TUNER light will appear on the front of the System. The current radio frequency (station number) will appear on the display panel. 2 Press AUDIO/BAND to select FM or MW. 3 Press s or B to select a preset radio station. You also can select a preset radio station by pressing the Number buttons.
E9015ED_EN.qx3 03.7.29 6:32 PM Page 23 Specifications 20 Hz to 44 kHz (surround off) (sample rate: 96 kHz) Audio CD: 20 Hz to 20 kHz Signal-to-Noise Ratio Audio CD: 120 dB (JEITA: Japan Electronics and Information Technology Industries Association) Dynamic Range DVD (linear sound): 99 dB Audio CD: 99 dB (JEITA) Total Distortion Factor Audio CD: 0.003% (JEITA) DVD: 0.003% Wow and Flutter Below the measurement limitation (±0.
E9015ED_EN.qx3 03.7.29 PHILIPS NORGE AS Sandstuveien 70, PO Box 1, Manglerud N-0612 Oslo NORWAY Phone: 2274 8250 6:32 PM Page 24 PHILIPS Österreichische Philips Industrie GmbH Triesterstrasse 64 1101 Wien AUSTRIA Tel: 0810 001 203 PHILIPS PORTUGUESA, S.A. Consumer Information Center Rua Dr. António Loureiro Borge, nr.5 Arquiparque, Miraflores P-2795 L-A-VEHLA PORTUGAL Phone: 021-4163063 OY PHILIPS AB Sinikalliontie 3, 02630 Espo Helsinki FINLAND puh.