Always there to help you Register your product and get support at www.philips.
Contents 1 Important safety instructions Hearing Safety General information 2 Your Bluetooth in-ear headphones What's in the box Other devices Overview of your Bluetooth in-ear headphones 3 Get started Charge your headphones Pair the headphones with your mobile phone 4 Use your headphones Fix the battery with the magnetic clip Connect the headphones to a Bluetooth device Manage your calls and music Share your music 5 Technical data 2 2 2 3 3 3 3 4 4 4 6 6 6 6 7 8 6 Notice 9 Declaration of conformit
1 Important safety instructions Hearing Safety General information To avoid damage or malfunction: Caution •• Do not expose headphones to excessive heat. •• Do not drop your headphones. •• Headphones shall not be exposed to dripping or splashing. •• Do not allow your headphones to be submerged in water. •• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives.
2 Your Bluetooth in-ear headphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips wireless in-ear headphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music. What's in the box Magnetic clip Quick start guide Other devices A mobile phone or device (e.g.
3 Get started • • Manual pairing NFC pairing Manual pairing Charge your headphones Note 1 2 •• Before you use your headphones for the first time, charge the battery for 5 hours for optimum battery capacity and lifetime. •• Use only the original USB charging cable to avoid any damage. •• Finish your call before charging the headphones, as connecting the headphones for charging will power the headphones off. •• You can operate the headphones normally during charging.
2 Enter the headset password "0000" (4 zeros) if prompted. For those mobile phones featuring Bluetooth 3.0 or higher, no need to enter a password.
4 Use your headphones Fix the battery with the magnetic clip Manage your calls and music On/off Task Turn the headphones on. Turn the headphones off. Button Music/ call control Music/ call control Operation Press and hold for 2 seconds. Press and hold for 4 seconds. »» The white LED is on and fades out. Music control Connect the headphones to a Bluetooth device 1 2 Turn on your mobile phone/Bluetooth device. Press and hold the on/off button to turn the headphones on. »» The blue LED flashes.
Other headphones indicator status Headphones status The headphones are connected to a Bluetooth device, while the headphones in standby mode or while you are listening to music. The headphones are ready for pairing. The headphones are on but not connected to a Bluetooth device. Low battery level. Battery is fully charged. Indicator The blue LED flashes for every 8 seconds. Headphones A Connect to mobile phone A. Start sharing music to headphone B.
5 Technical data • • • • • • • • Up to 7.5 hours of music time or 6 hours of talk time Up to 170 hours of standby time Normal time for a full charge: 2 hours Rechargeable lithium polymer battery (125 mAh) Bluetooth 4.
6 Notice Declaration of conformity Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c.philips. com. Disposal of your old product and battery household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.
Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license. Other trademarks and trade names are those of their respective owners. N-Mark The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.
7 Frequently asked questions My Bluetooth headphones do not switch on. The battery level is low. Charge the headphones. I cannot pair my Bluetooth headphones with a mobile phone. The Bluetooth is disabled. Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headphones. Pairing does not work. Make sure the headphones are in pairing mode. • Follow the steps described in this user manual (see 'Pair the headphones with your mobile phone' on page 4).
2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. UM_SHQ8300_00_EN_V2.
