operation manual

7EN
Other headphones indicator status
Headphones status Indicator
The headphones
are connected
to a Bluetooth
device, while the
headphones in
standby mode
or while you are
listening to music.
The blue LED ashes
for every 8 seconds.
The headphones are
ready for pairing.
The LED ashes blue
and white alternately.
The headphones are
on but not connected
to a Bluetooth device.
The blue LED ashes
quickly.
If no connection
can be made, the
headphones will turn
itself off within 5
minutes.
Low battery level. The white LED ashes
3 times for every 10
seconds until it is out
of power.
Battery is fully
charged.
White LED is off.
Share your music
With MusicChain™, you can create a series
of songs and share music between two same
headphones.
Headphones A Headphones B
Connect to mobile
phone A.
Connect to mobile
phone B and place it near
headphones A.
Start sharing music
to headphone B.
1 Double-click the
music/call button.
» Your hear 2
beeps.
» The blue
and white
light ashes
alternately.
2 Wait for the
connection with
headphone B.
» You will hear
"Pairing,
please wait."
Waiting time
varies from
15 to 60
seconds.
Start sharing music from
headphone A.
1 Click the music/call
button for 3 times.
» You hear 3 beeps.
» The blue, white
and off light ashes
alternately.
2 Wait for the connec-
tion with headphone A.
It may take 1 minute,
or the connection
timeout will occur after
1 minute.
» You will hear "Pair-
ing, please wait."
Waiting time varies
from 15 to 60
seconds.
To disconnect
from headphone
B, double click the
music/call button.
To disconnect from
headphone A, double
click the music/call
button.
Tip
• Waiting time for music sharing may vary from 15 to
60 seconds.
• Make sure you place headphones A close to
headphones B in order to have a better the connection
process and duration.
• During music chain mode, if headphones B are
connected to mobile B, you can share music from
mobile phone B after you stop music playing at mobile
phone A.