Wireless TV Link User Manual SLV3100
1 A 2 SLV3100 WIRELESS TVLINK TRANSMITTER IR Channel 1234 7 6 DC 9V ON/OFF ON/OFF 5 8 B 4 3 9 SLV3100 WIRELESS TVLINK RECEIVER DC 9V Channel 1234 13 E 14 ON/OFF ON/OFF 12 11 15 10 15
EN Contents Page Overview 4 Control and display elements 4 Your Wireless TV Link 5 Safety 5 Installation 6 Operation 8 Enjoy your Wireless TV Link 8 Troubleshooting 9 Information Health and safety Maintenance and service Recycling and disposal Warranty Glossary 11 11 11 11 12 12 3
EN Overview Control and display elements A Transmitter 1 Power light: > green: on 2 Remote control signal light 3 On/off switch 4 Power input connector (DC 9V) 5 SCART cable 6 Wireless channel selection switch 7 Remote control blaster cord port B Receiver 8 Power light: > green: on 9 Remote control signal light 10 On/off switch 11 Power input connector (DC 9V) 12 SCART cable 13 Wireless channel selection switch E Remote control blaster cord 14 Connector 15 Blaster light 4
Your Wireless TV Link EN You can say good-bye to wires. With your Wireless TV Link you can now wirelessly connect a second TV and watch the device on your second TV. Safety • • • • • • • • • Read the instructions in this manual carefully before you connect, install and use the product. Keep this manual for future reference. The product is for indoor use only. Do not use the product close to water. Do not expose the product to extreme heat. In case of technical difficulties, do not open the product.
EN Installation For basic installation, see the quick start guide that came with your Wireless TV Link. 3 Enjoy Install the remote control blaster cord DC 9V 1 Switch off the transmitter (A). ON/OFF 1234 2 Connect the remote control blaster cord (E) to the IR socket. 3 Position the blaster light in front of the video source. See the user manual of the video source for the exact location of the IR sensor on the front panel. DC 9V ON/OFF DC 9V ON/OFF 6 4 5 6 7 Switch on the transmitter (A).
Installation EN Remove interference on TV2 1234 1234 1 Find the CHANNEL switch on the transmitter (A). 2 Set the CHANNEL switch to a different number. 3 Find the CHANNEL switch on the receiver (B). 4 Set the CHANNEL switch to the same number as on the transmitter (A).
Operation EN Enjoy your Wireless TV Link For basic operation, see the quick start guide that came with your Wireless TV Link. 3 Enjoy Watch a cable TV program on TV2 Your VCR or DVD recorder needs to be connected to the transmitter (A) of the Wireless TV Link and connected to the Cable-TV signal. DC 9V ON/OFF DC 9V ON/OFF 1 Switch on the transmitter (A). 2 Switch on the VCR or DVD recorder. 3 Take the remote control of the VCR or DVD recorder with you. 4 Go to TV2. 5 Switch on TV2.
Troubleshooting Problem No image or wrong image on TV1 No image or wrong image on TV2 EN Tip • Make sure video source is connected to the transmitter (A). • Make sure the transmitter (A) is connected to TV1. • Make sure SCART cables are firmly inserted. • Make sure the video source is switched on. • Make sure the correct SCART input on TV1 is selected. • Make sure SCART cables are firmly inserted. • Make sure the receiver (B) is connected to TV2.
EN Troubleshooting Problem Tip Interference in the • Slightly change the position of the receiver (B) or the transmitter (A). image on TV2 • Change the wireless channel that is used for communication. See page 7. • The receiver (B) is out of range of the transmitter (A). The number of walls and ceilings in between the receiver (B) and transmitter (A) restrict the distance. The video sources • Point the remote control directly to the receiver (B).
Information EN Health and safety The product transmits and receives radio waves when it is switched on. The product complies with the standards that are defined for it. The quality of the image can be influenced by the use of microwave ovens. Other wireless systems (Bluetooth, wireless networks etc.) can also have influence on the quality of the image. The product is based on RF technology.
EN Information Warranty One year limited warranty For 12 month from the date of purchase the manufacturer repairs or replaces any faulty product free of charge, subject to proof of purchase, provided the fault has not been caused by improper handling or use, and provided the product has not been damaged, whether as a result of an accident or of repair by others than the manufacturer. Glossary CVBS Easylink RF technology SCART 12 Video standard for showing colors on a TV.
AQ95-56F-606-KR (report No.) EC DECLARATION OF CONFORMITY We , Philips Consumer Electronics, P&A CC: Building SBP6 (manufacturer's name) P.O.Box 80002, 5600 JB Eindhoven, The Netherlands (manufacturer's address) declare under our responsibility that the electrical product: Philips (name) SLV3100 -/00 -/05 ( Tx: SLV3100/00 -T ; Rx: SLV3100/00 -R) (type or model) Wireless TV link (product description) to which this declaration relates is in conformity with the following standards: EN301 489-1 V1.4.
Need help? Troubleshooting See page 9 Online help: www.philips.com/support Helpline België/Belgique/Belgien Danmark Deutschland España France ÅëëÜäá Ireland Italia Luxemburg/Luxembourg Nederland Norge Österreich Portugal Schweiz/Suisse/Svizzera Suomi Sverige UK (United Kingdom) 070 222 303 (€ 0.17) 3525 8759 0900 1101211 (€ 0.12) 902 888 784 (€ 0.15) 08 9165 0005 (€ 0.23) 0 0800 3122 1280 01 764 0292 899 23 45 06 (€ 0.25) 40 6661 6544 0900 8407 (€ 0.20) 2270 8111 0900 060 827 (€ 0.