User Manual
Table Of Contents
- 1 Important
- Safety instructions
- Cleaning and disinfection
- Disposal of your old product
- About this user manual
- 2 Your SpeechMike Premium Air
- Product highlights
- What's in the box
- Overview of your SpeechMike
- 3 Get started
- Charging the battery
- Learn about the battery status
- Turn the device on and off
- Pairing
- Learn about wireless technology
- Idle mode
- Locate your docking station
- Resetting the wireless connection
- 4 Use your SpeechMike Premium Air
- Create a recording
- Customize your SpeechMike
- Button modes
- Hands-free dictating with a Philips foot control
- Upgrading the firmware
- 5 Troubleshooting
- LED colors and meanings
- 6 Technical data
X During chrging, the bttery LED on the
SpeechMike nd on the docking sttion glow
ornge.
If the bttery is deeply dischrged, the bttery
LED on the SpeechMike shes ornge. In this
cse, the device cnnot be operted until the
bttery LED glows ornge.
X When chrging is complete, the bttery LED on
the SpeechMike nd on the docking sttion glow
green.
Note
• If you experience connection problems, see LED
colors nd menings
for more informtion.
Chrge vi computer
Before you chrge the bttery vi computer, mke sure
tht your computer is turned on.
Note
• If you chrge your device vi computer insted of
using the power supply unit, the chrging speed
might slow down due to lower chrging current.
• Recording is not possible if only your SpeechMike
is connected to the computer. To mke recording,
you lso need to connect the docking sttion to the
computer.
X During chrging, the bttery LED glows ornge.
X When chrging is complete, the bttery LED glows
green.
Lern bout the bttery sttus
Immeditely fter turning the SpeechMike on or when
the SpeechMike is removed from the docking sttion,
the bttery LED indictes the bttery sttus. For more
informtion, see
LED colors nd menings.
Bttery LED Bttery sttus
green more thn 6 hours
recording time left
ornge
(only displyed when
shortly pressing the a
Power button)
6 hours or less recording
time left
red
2 hours or less recording
time left
Tip
• You cn lwys check the bttery sttus of your
SpeechMike by shortly pressing the a Power button.
Turn the device on nd o
To turn the device on:
• Shortly plce the device into the docking sttion
or press nd hold the a Power button for bout 3
seconds.
X The SpeechMike beeps.
X If the connection with the docking sttion
succeeds, the connection LED on the SpeechMike
nd on the docking sttion glow green.
To turn the device o:
• Press nd hold the a Power button for bout 3
seconds.
X The SpeechMike beeps nd the connection LED
on the docking sttion glows red.
Note
• The SpeechMike cn't be turned o while it is in
the docking sttion. To turn it o, remove your
SpeechMike from the docking sttion rst.
9
Get started