PACKAGE CONTENTS The package comes with the following items: PC Camera User’s Manual Microphone LOCATION OF CONTROLS 1 2 3 1. Focus Ring – Manual Focus 2. USB Cable 3.
INSTALLATION PROCEDURE The SPC110NC is designed to use as the Plug & Play device, it works on Windows XP (Service Pack 2) and Vista without any driver installation. CONNECTING YOUR WEB CAMERA Connect the Webcam to your computer. The “New Hardware Found” message will appear at the bottom right corner. The product name “Philips Webcam” will appear: After the installation is finished, it will show “The device is ready to use”. CONNECTING THE MICROPHONE The SPC110NC package comes with an external microphone.
Note: Please check your PC to determine possible availability of a microphone jack. If the jack is not available, then a USB microphone is also an option. If USB ports are all in use, then a hub will allow expansion of available USB ports. PICTURE QUALITY SETTING You can always adjust the picture quality setting of your webcam during the video chatting. Select “Webcam Setting” by right clicking your mouse at the live video picture.
The following hints will help you achieve the best results with your camera: Camera Placement: • • • • • • • Position the camera so that the subject is at the centre. Place the camera on a steady surface lighting. Use sufficient lighting. Place the light source behind the camera and facing the subject. Maintain a consistent lighting environment. Do not mix fluorescent and other light types. Do not aim the camera directly at the light source. Focus the lens for a sharper image.
SPECIFICATIONS • • • • • • • • Image sensor: 300,000 Pixels CMOS sensor 1/7” Lens: f/2.6 USB interface 1.1, USB 2.0 Full speed Resolution: 640 x 480, 352 x 288, 320 x 240, 176 x 144, 160 x 120 Frame rate: maximum 30 fps (MJPEG) Unit size: 1.85” x 1.
Limited One-Year Warranty Philips warrants that this product shall be free from defects in material, workmanship and assembly, under normal use, in accordance with the specifications and warnings, for one year from the date of your purchase of this product. This warranty extends only to the original purchaser of the product, and is not transferable.
FCC compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note! This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
