operation manual

18
Region NTP Server
North America 123.163.4.102
192.5.41.41
192.5.41.209
207.200.81.113
208.184.49.9
Europe: 129.132.2.21
130.149.17.8
Australia: 128.250.36.3
Asia Pacific 137.189.8.174
Languages
To change the default language:
1. Select your language in the drop down menu
2. Select ‘accept’ to confirm your changes.
Administrator
To change the default administrator password:
1. Fill in a new password in the password field
2. Retype the same password in the confirm
password field
3. Select accept to confirm your changes.
See ‘How to reset your NAS’ when you have lost this
password.
Enable FTP Server
To enable the FTP function:
1. Select ‘Enable FTP Server’
See ‘Enjoy your FTP server’ for more information.
System management – LAN Setup
To change the default network settings of your
NAS:
System Name
1. Fill in a new system name (hostname) in the
System name field
If you change the system name of your NAS, you
need to run the Philips network storage wizard
again to detect your NAS and map it.
Assign IP settings
1. Select ‘Automatically assign IP settings
(DHCP)’ or ‘Manually assign IP settings’
2. When set on ‘manually’, you can configure the
fields:
IP Address
Subnet Mask
Default Gateway
DNS Server
Workgroup
1. Fill in a new Workgroup in the Workgroup
field