Register your product and get support at PhotoFrame SPF2017 SPF2027 SPF2047 EN User manual
1 Important 2 Safety 2 Safety precautions and maintenance 2 Notice 2 Warranty 2 Declaration of Conformity 2 Recycling 3 End of life disposal 3 Recycling Information for Customers 3 Compliance with Electro-Magnetic Field (EMF) 3 North Europe Information (Nordic Countries) 4 Banned Substance Declaration 4 2 Your PhotoFrame Introduction What’s in the box Overview of your PhotoFrame 3 Get started Install the stand Connect power Turn on the PhotoFrame Connect a storage device Connect PC 4 Display photos 5
1 Important Safety Any operation expressly prohibited in this manual, any adjustments, or assembly procedures not recommended or authorised in this manual shall void the warranty. Safety precautions and maintenance • • • • • • • • • • Never touch, push, rub or strike the screen with hard objects as this may damage the screen permanently. When the product is not used for long periods, unplug it. Before you clean the screen, turn off and unplug the power cord.
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products.
enabling Philips to anticipate further developments in standardisation for early integration in its products. North Europe Information (Nordic Countries) VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
E n g lish 2 Your PhotoFrame Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction • AC-DC power adaptor • CD-ROM (Digital User Manual) With Philips Digital PhotoFrame, you can display JPEG photos in high quality. You can place it on a flat surface or hang it on the wall for a continuous display.
• (For SPF2047) Extra silver frame with design Overview of your PhotoFrame l a b c d e f g h a • Turn on/off the PhotoFrame • • Play slideshow Toggle between slideshow mode, browse mode, and calendar mode b c 6 / / / • Select the previous/next/right/left option EN i j k d OK • Confirm a selection e • • Enter the main menu Enter/Exit photo menu • Slot for a USB flash drive f g Kensington lock
h i • Slot for a USB cable to PC E n g lish • SD/MMC/xD/MS/MS Pro Slot for an SD/MMC/xD/MS/MS Pro card j DC • Socket for the AC-DC power adaptor k Stand hole l Wall mounting hole EN 7
3 Get started Connect power Note Caution • When you position the PhotoFrame, ensure that the power plug and outlet are easily accessible. • Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
1 • Press and hold for more than 1 second. » The language setting menu is displayed. To turn off the PhotoFrame, press and hold . E n g lish For the first time use: Connect a storage device Caution • Do not remove a storage device from the PhotoFrame when files are transferring from or to the storage device. 2 Select a language, and press OK to confirm. » Help message for control keys is displayed.
Connect PC Caution • Do not disconnect the PhotoFrame from the PC when files are transferring between the PhotoFrame and the PC. 1 Connect a suitable USB cable to the PhotoFrame and to the PC. » You can drag and drop photos from the PC to the internal memory of the PhotoFrame. 2 After all copy and save actions are complete, disconnect the USB cable from the PC and the PhotoFrame.
• • Note • You can play only JPEG photos on the PhotoFrame. 1 Tip • In the main menu, select [Photos] and then press OK to confirm. In slideshow mode, press / to display the next/previous photo. In slideshow mode, press to toggle between slideshow, browse, and calendar mode. • • In slideshow mode, the PhotoFrame displays all photos automatically. In browse mode, the PhotoFrame displays the current photo and you can press / to display the next/ previous photo.
5 Browse photos in thumbnail mode and access photo menu 3 Select an album, and then press OK to confirm. » Photos in the album are displayed in thumbnail mode. 4 Press / / / to select a photo, and then press OK to confirm. • To select all photos displayed on the screen, press and hold OK for more than 1 second. 5 Press to access [Photo Menu] and manage the photo. You can browse multiple photos in thumbnail mode. In thumbnail mode, you can access the photo menu to edit photos.
Delete photos Caution • Never remove a storage device before the copy or delete action completes. 1 In [Photo Menu], select [Copy to] and then press OK to confirm. E n g lish Copy photos Caution • Never remove a storage device before the copy or delete action completes. 1 In [Photo Menu], select [Delete] and then press OK to confirm. Select a photo effect 2 1 In [Photo Menu], select [Photo Effects] and then press OK to confirm. 2 Select an effect, and then press OK to confirm.
Select a photo frame Zoom and crop a photo 1 In [Photo Menu], select [Frames] and then press OK to confirm. 1 In [Photo Menu], select [Zoom and Crop] and then press OK to confirm. 2 Select a frame, and then press OK to confirm. 2 Press to zoom in a photo. • Press to zoom out a photo. 3 Press / / / to crop the photo, and then press OK to confirm. 4 Select [Yes], and then press OK to confirm. Rotate a photo 1 In [Photo Menu], select [Rotate] and then press OK to confirm.
3 Select [New Album], and then press OK to confirm. » A keypad is displayed. 4 To enter the new name (up to 24 characters), select an alphabet/number and then press OK to confirm. • To switch between uppercase and lowercase, select [abc] on the displayed keypad and then press OK to confirm. 5 When the name is complete, select [Enter] and then press OK to confirm. E n g lish 6 Manage an album Create an album You can create an album on the PhotoFrame and on a storage device connected to the PhotoFrame.
Delete an album Rename an album 1 2 3 1 2 3 Select an album. Press to access the album menu. Select [Delete Album], and then press OK to confirm. Select an album. Press to access the album menu. Select [Rename Album], and then press OK to confirm. » A keypad is displayed. » A confirmation message is displayed. 4 Select [Yes], and then press OK to confirm. 16 EN 4 To enter the new name (up to 24 characters), select an alphabet/number and then press OK to confirm.
Select a transition effect 1 In the main menu, select [Slideshow] and then press OK to confirm. 2 Select [Transition Effect], and then press OK to confirm. 3 Select a transition effect, and then press OK to confirm. Select slideshow sequence You can display the slideshow in sequence or randomly. 1 2 In the main menu, select [Slideshow] and then press OK to confirm. Select [Slideshow sequence], and then press OK to confirm.
Select slideshow frequency Display collage photos 1 In the main menu, select [Slideshow] and then press OK to confirm. 1 In the main menu, select [Slideshow] and then press OK to confirm. 2 Select [Frequency], and then press OK to confirm. 2 Select [Collage], and then press OK to confirm. 3 Select a transition time, and then press OK to confirm. 3 Select [Multi], and then press OK to confirm. 4 5 6 Select a layout. 7 18 EN Press (Right) to select [Photo 1].
Repeat steps 5 to 7 until all photos are selected for the format. Select photo background You can select a background border color for photos that are smaller than the screen of the PhotoFrame. 9 • In the main menu, select [Slideshow] and then press OK to confirm. 2 Select [Background Color], and then press OK to confirm. 3 Select a background color / [Auto fit] / [RadiantColor], and then press OK to confirm.
» If you select [RadiantColor], the PhotoFrame extends the color on the edges of a photo that is smaller than the full screen to fill the screen without black bars or aspect ratio distortion.
1 In the main menu, select [Setup] and then press OK to confirm. 2 Select [Brightness], and then press OK to confirm. 3 Press / to adjust brightness, and then press OK to confirm. Select on-screen language 1 2 In the main menu, select [Setup] and then press OK to confirm. Select [Language], and then press OK to confirm. 3 Select [Language Setting], and then press OK to confirm. 4 Select a language, and then press OK to confirm.
2 3 Select [Memory Card], and then pres OK to confirm. Select [Delete enable] / [Delete disable], and then press OK to confirm. Create an event reminder 1 In the main menu, select [Setup] and press OK to confirm. 2 Select [Event Reminder], and then press OK to confirm. 3 Select [New reminder], and then press OK to confirm. Set an event reminder You can create a reminder for a special event, and you can also select a photo to be displayed at a selected time.
4 To enter the new name (up to 24 characters), select an alphabet/number and then press OK to confirm. • To switch between uppercase and lowercase, select [abc] on the displayed keypad and then press OK to confirm. 5 When the name is complete, select [Enter] and then press OK to confirm. 2 Select [Event Reminder], and then press OK to confirm. 3 Select a reminder, and then press OK to confirm. 4 Select [Set time] / [Set date], and then press OK to confirm.
Set on/off a reminder 1 2 3 Select a reminder, and then press OK to confirm. 4 Select [Set], and then press OK to confirmn. • Select [On] to set the reminder on, and then press OK to confirm. • To set the reminder off, select [Off] and then press OK to confirm. In the main menu, select [Setup] and then press OK to confirm. Select [Event Reminder], and then press OK to confirm. Delete a reminder 24 EN 1 In the main menu, select [Setup] and then press OK to confirm.
Select [Yes], and then press OK to confirm. 3 Select a reminder, and then press OK to confirm. 4 Select [Photo], and then press OK to confirm. 5 Select a photo source, and then press OK to confirm. 6 Select a photo, and then press OK to confirm. E n g lish 5 Select a reminder photo You can select a photo to display for a reminder. Each event reminder activates the latest defined photo only. If there is no defined photo, the reminder takes the default Philips start up photo.
Set snooze 1 4 In the main menu, select [Setup] and then press OK to confirm. Select an options, and then press OK to confirm. Set time and date 2 1 In the main menu, select [Setup] and then press OK to confirm. 2 Select [Time and Date], and then press OK to confirm. Select [Event Reminder], and then press OK to confirm. 3 Select [Snooze], and then press OK to confirm.
4 Select [Set time] / [Set date], and then press OK to confirm. Set time and date format E n g lish 3 You can set the format of the time and date displayed on the PhotoFrame. 1 In the main menu, select [Setup] and then press OK to confirm. 2 Select [Time and Date], and then press OK to confirm. Press / / / and OK to enter the current time/date, and then press OK to confirm.
3 Select [Set time format] / [Set date format], and then press OK to confirm. 2 Select [Time and Date], and then press OK to confirm. 4 Select the time/date format, and then press OK to confirm. 3 Select [Show clock], and then press OK to confirm. 4 Select an option, and then press OK to confirm. • [No clock] (No clock is displayed.) • [In slideshow] (Clock is displayed.) • [Both] (Both clock and calendar are displayed.) Show clock You can show clock or calendar in slideshow on the PhotoFrame.
3 Select [Set time], and then press OK to confirm. 4 Select [Weekday] / [Weekend], and then press OK to confirm. 5 Select [Auto on] / [Auto off], and then press OK to confirm. • To cancel [Auto on] / [Auto off], select [Set On/Off] > [Off]. E n g lish Set display auto on/off by time You can configure the time for the PhotoFrame to turn on or off the display automatically. Note • Ensure that you set the current time and date of the PhotoFrame before you set the auto on/off function.
6 Press / / / and OK to set the time for auto-on/auto-off function, and then press OK to confirm. 2 Select [Status]. » The status of the PhotoFrame is displayed on the right of the screen. Tip • • Weekday: Monday 00:00 to Friday 23:59 Weekend: Saturday 00:00 to Sunday 23:59 Set auto orientation You can display photos in the correct orientation depending the horizontal/vertical orientation of the PhotoFrame.
Select[Auto Orientation], and then press OK to confirm. 2 Select [Set Beep], and then press OK to confirm. 3 Select [Enable] to set on auto orientation function, and then press OK to confirm. • To set off auto orientation function, select [Disable] and then press OK to confirm. 3 Select [On] to turn on the button sound, and then press OK to confirm. • To turn off the button sound, select [Off] and then press OK to confirm. Set button sound 1 In the main menu, select [Setup] and then press OK to confirm.
2 Select [DEMO], and then press OK to confirm. 2 Select [Settings], and then press OK to confirm. 3 Select [On], and then press OK to confirm. 3 Select [Default], and then press OK to confirm. Set to factory default 1 In the main menu, select [Setup] and then press OK to confirm.
Note • Product information is subject to change without prior notice. Picture/Display • Viewing angle: @ C/R > 10, 140° (H)/100° (V) • Lifetime, to 50% brightness: 20000 hr • Aspect ratio: 4:3 • Panel resolution: 800 x 600 • Brightness (typical): 250 cd/m² • Contrast ratio (typical): 300:1 Connectivity USB: USB 2.0 Host, USB 2.
10 Frequently asked questions Is the LCD screen touch-enabled? The LCD screen is not touch-enabled. Use the buttons on the back to control the PhotoFrame. Can I switch different slideshow photos by using different memory cards? Yes. When a memory card is connected to the PhotoFrame, you can play photos on the specific memory card in slideshow mode. Will the LCD be damaged, if I keep showing the same photo for a long time? No.
A Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-definition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. J JPEG A very common digital still picture format. A still-picture data compression system proposed by the Joint Photographic Expert Group, which features small decrease in image quality in spite of its high compression ratio.
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. UM_V2.