Owner's Manual

EN-11
Step 3: First usage
To help you get the most out of your PhotoFrame, we installed a
video tutorial that automatically starts playing when you first turn
on your unit. To cancel the looping video and start playing your
own photos, press any of the buttons on the back. Follow the
five-step process to familiarize yourself with how the control
buttons work. This simple process is automatically disabled
after the first use. You can turn on the tutorial by going into
SETTINGS.
Step 4: Basic setup
Select a language and set the date and time during the first use
of the PhotoFrame.
Selecting a language
Getting started
Philips Digital PhotoFrame
1. In the main menu, press or to select SETTINGS ,
and then press "OK"
2. Press The General Settings page appears.
3. Press "OK", press to go to Language, and then press "OK" again.
4. Press or to select a language you wish to use, and
then press "OK"
5. Press "ESC" to exit
Setting the date and time
1. In the main menu, press or to select SETTINGS ,
and then press "OK". The Date and Time page appears.