Quick start guide

Welcome to Philips!

www.philips.com/welcome

Speciﬁ cations are subject to change without notice.

Trademarks are the property of Koninklijke Philips

Electronics N.V. or their respective owners.

Connect

Install

Enjoy

PhotoViewer

SPV3000

Quick start guide

What’s in the box

What you also need

TV (LCD or other)

Quick start guide User manual Product sticker (1x)

Stand stickers (2x)

Stand Power adapter Component video cable

Audio & compo site video cable

Remote control

Troubleshooting

Problem Tip

I don’t see the user • Set the TV to the correct programme number

interface of the (for example, EXT, 0, AV).

PhotoViewer on the TV. See the documentation that came with your TV.

There is no sound signal • Check if the audio cables are connected correctly.

from the TV or audio • Check if the volume of your TV or audio system is turned on.

system. • Make sure that the ﬁ le format of your audio ﬁ les is MP3 and

that the ﬁ les do not have copy protection.

The PhotoViewer does • When you press a button on the remote control, point the

not react when I press remote control in the direction of the power switch of the

a button on the remote PhotoViewer.

control. • Replace the battery of the remote control.

The picture seems to be • Change the resolution with the resolution button on the

transformed. remote control.

• Change the settings of the connected TV.

See the documentation that came with your TV.

The connected printer • Make sure that the printer is switched on.

does not react. • Make sure that the printer is connected to the USB port at

the back of the PhotoViewer.

• Change the settings of the connected printer. See the

documentation that came with your printer.

• Make sure that the printer supports the ESC/P-R protocol.

See the website www.philips.com/support for more questions and answers.

QSG_PhotoViewer_EN.indd 1-4QSG_PhotoViewer_EN.indd 1-4 5/31/07 11:20:085/31/07 11:20:08

PAGE 1
PhotoViewer Troubleshooting Problem I don’t see the user interface of the PhotoViewer on the TV. Tip • Set the TV to the correct programme number (for example, EXT, 0, AV). See the documentation that came with your TV. There is no sound signal from the TV or audio system. • • • Check if the audio cables are connected correctly. Check if the volume of your TV or audio system is turned on. Make sure that the file format of your audio files is MP3 and that the files do not have copy protection.
PAGE 2
1 Connect 2 Install 3 Enjoy You need an adapter to insert these memory cards: MS Duo, MMC, RS-MMC, Mini SD. View a picture Play a slideshow A A The video cable to a TV B Prepare Stand (optional) A • 1x 2x Remove the protective foil from the bottom of the remote control. • • • • Check the connectors on your TV to determine whether you need the composite video cable (yellow connector) or the component video cable (red, green and blue connectors). Connect the correct by-packed video cable.