User Manual
Audio/Video
SRP6320R/27
1. Power – Turns TV ON/OFF
2. Setup – Used to program the remote
3. Device buttons – Select the device to control
4. Menu – Displays on-screen menu
5. Back – Returns to previous
menu/screen
6. Home – Returns to the home screen to
access streaming features
7
. Options (*) – Displays additional options
8. Up/down/left/right menu navigation
9. OK – Selects menu items
10. Volume up/down
11. Mute – Mutes sound
12. Last – Returns to previous channel
13. Channel up/down
14. Rewind, play/pause, fast forward
15. Numbers – Enter numbers for direct
channel selection
16. Dot (.) – For direct entry of digital
channels, e.g., 4.1
17. Input – Selects video input or Guide on
cable and satellite receivers
This remote is preprogrammed for use with
Samsung TVs and Roku boxes. For
programming other devices, direct code
entry is quick, easy and recommended.
1. In the Code List (included with remote),
circle the 4-digit codes for the type and
brand of device you wish to control.
2. Press and hold down SETUP until the
remote’s red light turns on.
3. Press and release the chosen device
button (e.g., TV). The red light will blink
once and remain on.
4. Enter the rst 4-digit code circled in Step
1. The red light will turn o.
5. Point the remote at the device and test
the buttons. If they don’t work as
expected, repeat Steps 2-5 with the next
circled code.
6. Repeat the process for each device you
wish to control.
Programming notes
• Some codes may operate only a few
device functions, so test other codes for
more functionality.
• Trouble nding a code? Program the remote
using the auto code search method.
• Keep your device codes for future reference.
Button Functions
Setup
Remote does not operate your device
• Make sure the batteries are fresh and
installed correctly.
• Aim the remote directly at your device
and make sure there are no obstructions
between the remote and the device.
• Make sure you select the appropriate
device on the remote you wish to control
(TV for TV, etc.).
• Try programming the remote with a
dierent code. See Direct Code Entry
section.
• Remote may not be compatible with
your device.
Remote does not operate some features of
your device
• Sometimes a particular code might
operate a few features but not all. Try
programming the remote with a dierent
code from the Code List. See Direct
Code Entry section.
• Remote may not be able to operate all
features of your device or button names
may be dierent than that of your
original remotes.
Troubleshooting
1. Press and hold SETUP until the red light
stays on.
2. Press and release the MUTE button.
3. Press and release 0 (zero). The red light
will blink twice.
Reset to Factory Settings
Primary Audio Control
Thank you
for your purchase!
Like our product?
Leave a review on your favorite
retailer website or amazon.com
Having problems?
Let us know how we can help.
Call 1-844-816-0320 between
7AM-8PM, M-F, Central Time.
Scan to watch a step-by-step instructional
video or visit byjasco.com/54464i
Get exclusive, web-only deals and more!
Scan here or visit byjasco.com/deals
Product
instructions
made easy
For additional Philips
remote controls, visit
our website!
byjasco.com/remotes
Need more
remote control
devices?
8
2
13
9
7
6
11
4
1
5
10
12
16
Roku
®
+ TV
universal
remote
This product and its sellers are not aliated
with Roku
®
. There is no endorsement or
sponsorship by non-aliated brands
provided or implied. All brand names and
products listed/shown are trademarks of
their respective owners.
See reverse for easy-to-follow
instructions and exclusive deals.
Register
your Philips
product
MADE IN CHINA
The Philips trademark and the Philips
Shield Emblem are registered trademarks
of Koninklijke Philips N.V. used under
license. This product has been
manufactured and is sold under the
responsibility of Jasco Products Company,
and Jasco Products Company LLC, 10 E.
Memorial Rd., Oklahoma City, OK 73114 is
the warrantor in relation to this product.
This product comes with a 90-day
warranty. Visit www.philips.com/support for
warranty details.
Questions? Contact our U.S.-based
Consumer Care at 1-844-816-0320
between 7AM–8PM, M–F, Central Time.
Preprogrammed for immediate use with Samsung
TVs and Roku boxes, simply insert two (2) AA
batteries (not included) and you’re ready to enjoy
your favorite shows. Alkaline batteries are
recommended for this remote.
Battery Installation
1. Press and slide battery cover downward
to remove.
2. Insert the batteries, making sure to match
the (+) (-) polarity inside the compartment.
3. Slide battery cover back into place.
Note: If your remote is not operating properly,
replace the batteries with new ones.
Battery Precautions
• Do not mix old and new batteries.
• Do not mix alkaline, standard
(carbon-zinc) or rechargeable
(Ni-Cd, Ni-MH, etc.) batteries.
• Always remove old, weak or worn-out
batteries promptly and recycle or dispose of
them in accordance with local and national
regulations.
Battery Saver
Your remote automatically turns o if the
buttons are held down for more than 8
seconds. This saves battery life if your
remote gets stuck in a place where the
buttons remain depressed (e.g., between
sofa cushions).
Code Saver
You have up to 10 minutes to change the
batteries in your remote without losing the
codes you have programmed.
3
3
14
15
17
Code identication lets you retrieve the
4-digit code used to program each of your
device buttons.
1. Press and hold down SETUP until the red
light turns on. Then, release it. The red
light will remain on.
2. Press the device button for the code you seek.
3. Press OK.
4. On the number pad, press 1 and count
how many times the red light blinks. This
is the rst digit in your code. Repeat the
process by pressing 2, 3 and 4 for the
remaining digits.
5. Press OK to exit this mode.
1
3/5
2
4
Auto code search cycles through all codes in
the remote to nd one for your device.
Before you begin, read through the steps
below to familiarize yourself with the auto
code search process.
1. Manually turn on the device you
wish to control. (Use the direct code
entry method for devices without
ON/OFF capability.)
2. Press and hold down SETUP until the
remote’s red light turns on.
3. Press and release the chosen device
button (e.g., TV). The red light will blink
once and remain on.
4. Point the remote at the device and press
POWER. The red light will blink and then
remain on after cycling through 10 codes.
Did the device turn o?
YES – Go to Step 5.
NO – repeat Step 4 to test the next 10 codes.
5. Manually turn on the device.
6. Point the remote at the device and press
VOL+. The red light will blink once and
remain on.
Did the device turn o?
YES – Press and release the same device
button pressed in Step 3. Then go to Step 7.
NO – Repeat Step 6 until the device turns
o. Wait 3 seconds between each VOL+
button press.
7. Use the remote to turn on the device.
Test the remote’s buttons. If they don’t
work as expected, repeat Steps 2-7.
8. Repeat the process for each device you
wish to control.
Auto Code Search Code Identication
Primary audio control lets you select an audio
device to control the volume no matter which
component you’re operating, like your TV.
Enabling Primary Audio Control
1. Press and hold SETUP until the red light
remains on.
2. Press the device button for the audio
component you wish to use.
3. Press the MUTE button.
4. Press VOL+. The red light will blink twice
and turn o.
Disabling Primary Audio Control
1. Press and hold SETUP until the red light
remains on.
2. Press the device button programmed for
primary audio control.
3. Press the MUTE button.
4. Press VOL-. The red light will blink twice
and turn o.
1
3
2
4
2
4
6
3
2
3
4
Direct Code Entry
Some combo devices (e.g., TV/VCR,
DVD/VCR, etc.) require use of a separate
mode button for each part of the combo
device. For example, if you have a TV/DVD
combo, you might need to set up a TV code
under the TV button and a separate DVD
code under the DVD button to control each
component.
Combo Devices