Always there to help you Register your product and get support at www.philips.
1 Important Safety Notice 2 Your Spotify Multiroom Speaker Introduction What’s in the box What else you need Overview of the main unit 2 2 2 4 4 4 4 5 7 Product information Specifications 20 20 8 Troubleshooting 21 9 Appendix: Understand meanings of LED colors 22 3 Prepare 6 Download SpeakerSet Multiroom Manager to your iOS or Android device 6 Connect power and switch on 6 4 Connect SW700M to your home Wi-Fi network 8 Option 1: Set up through an iOS device 8 Option 2: Set up through an Android d
1 Important Safety • • • • • Only use attachments/accessories specified by the manufacturer. Use only power supplies listed in the user manual. The product shall not be exposed to dripping or splashing. Do not place any sources of danger on the product (e.g. liquid filled objects, lighted candles). Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning •• Never remove the casing of this apparatus.
English Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
2 Your Spotify Multiroom Speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
English Overview of the main unit a b c d a b • • / e fg Skip to the previous/next song. Start or pause music play. c +/• Adjust volume. d System status indicator • Show the current status of the speaker. e DC IN • Connect the power adaptor. f SETUP button/indicator • Enter App-Assisted Wi-Fi Setup mode for connection of the speaker to a Wi-Fi network. • Show the Wi-Fi setup status. g WPS button/indicator • Enter WPS Setup mode for connection of the speaker to a Wi-Fi network.
3 Prepare 2 On the initial setup page, tap Setup a new speaker. Always follow the instructions in this chapter in sequence. Download SpeakerSet Multiroom Manager to your iOS or Android device 1 (For iPod touch/iPhone/iPad users) Install SpeakerSet from Apple App Store, and then run the app. Connect power and switch on Caution •• Risk of product damage! Make sure that the power (For users of Android smartphones or tablets) Install SpeakerSet from Google Play Store and then run the app.
English »» The system status indicator on the front panel blinks amber during boot-up. »» If a Wi-Fi connection has been set up for the speaker, the system status indicator turns solid green after successful connection. Tip •• The speaker enters standby mode automatically after 15 minutes of inactivity.
4 Connect SW700M to your home Wi-Fi network To connect SW700M to your existing home Wi-Fi network, you need to apply your home Wi-Fi settings to SW700M in one of the following ways (depending on the type of your smart device and whether your Wi-Fi router is WPS enabled): Devices required for speaker setup iOS device + Wi-Fi router Android device + Wi-Fi router WPS Wi-Fi router PC/Mac with Wi-Fi enabled + Wi-Fi router Setup method Choose option 1 (see 'Option 1: Set up through an iOS device' on page 8).
4 Tap Next on the above app screen, and then read how to proceed with network setup. Select Wireless (WI-FI) under HOW DO YOU WANT TO CONNECT?. Option 2: Set up through an Android device 1 2 5 6 7 8 9 English 3 Before setup, make sure that your Android device is connected to your home Wi-Fi network. As instructed on the app, press and hold SETUP on the back of SW700M for more than 3 seconds.
3 4 5 6 7 Tap Next on the above app screen, and then read how to proceed with network setup. Select Wireless (WI-FI) under HOW DO YOU WANT TO CONNECT?. Select the name of your home Wi-Fi network under Select a network to use speaker. Enter the password of your home Wi-Fi network, and then tap Done to finish setup. 1 As instructed on the app, press and hold WPS on the back of SW700M for more than 3 seconds. »» The Wi-Fi status indicator on the WPS button blinks green.
Press the WPS button on your home Wi-Fi router. WPS 3 Option 4: Set up through a PC/Mac (advanced) 1 2 English 2 Go to your Wi-Fi enabled PC/Mac. Press and hold SETUP on the back of SW700M for more than 3 seconds. »» Both the system status indicator on the front panel and the Wi-Fi status indicator on the SETUP button turns solid amber. Wait until successful connection of the speaker to your home Wi-Fi network. »» The speaker beeps. »» The Wi-Fi status indicator on the WPS button turns off.
Rename speakers 1 2 After successful Wi-Fi setup, go to the home page and tap the speaker icon on the app screen. Tap > beside the speaker name. 3 Rename the speaker as you like. 4 Tap Done to confirm.
3 Tap the Connect icon screen. on the play English 5 Play Enjoy Spotify music services through SW700M Note •• With Spotify, you can enjoy unlimited music on your new device. Thanks to the Spotify Connect feature, you can play and control all this music wirelessly. Choose music on your mobile or tablet, and hear it on your brand new device. •• Make sure that the speaker is connected to your home Wi-Fi network with Internet connection available.
5 Stream music from the Spotify app to the speaker. During play, you can: • press on the speaker to pause/ resume music play. • press / on the speaker to skip to the previous/next song. • press +/- on the speaker to adjust volume level. Tip •• See the SpeakerSet app screen for more advanced settings. •• You can take your iOS or Android device away from the network, or even switch it off. In this case, Spotify music will continue to play on your speaker.
5 6 Tick circles beside the speakers to add them into the group. Tap > beside the group name to enter the edit page. Edit the group name as you like on the edit page. 7 Tap the check mark at the top right on the above app screen, and then wait for more than 10 seconds until the grouping finishes. To ungroup speakers: 1 2 Tap beside the main speaker. Untick the box beside the speaker to be removed from the group.
Enjoy music streamed to the group speakers 1 2 On the home page, tap the icon of the main speaker on the SpeakerSet app screen. To adjust volume of all speakers in a group at the same time: 1 Tap Go Spotify app to play music to switch to the Spotify app. 2 3 4 5 16 Open the SpeakerSet app, then tap on the main page to enter the volume adjustment page. Log in to your Spotify premium account. Tap the Connect icon main speaker. to select the Select and play your favorite music from the Spotify app.
English To adjust volume of an individual speaker: • Press +/- on the top panel of the speaker. • Open the SpeakerSet app, then move the slider beside the speaker on the above volume adjustment page directly. To play/pause music play: • Press on the top panel of any speaker in the group or use controls on the Spotify app screen directly. Tip •• On the volume adjustment page of the SpeakerSet app, you can also tap beside a speaker to mute/unmute its volume output.
6 Other features 5 Tap Factory reset to enter the factory reset page. Restore factory settings In some cases, you may need to reset the speaker, for example, when you need to reset the Wi-Fi settings or log out from the current Spotify premium account. 1 2 3 4 Make sure that SW700M is powered on and connected to the same Wi-Fi network as your smartphone or tablet. Make sure that your home Wi-Fi network is connected to the Internet. Run SpeakerSet on your iOS or Android smartphone or tablet.
5 Tap Firmwareupgrade to enter the firmware upgrade page. English Upgrade firmware To improve the performance of SW700M, Philips may offer you new firmware for upgrade of your SW700M. Warning •• Always connect your SW700M to AC power for firmware upgrade. Never power off your SW700M nor close the app during firmware upgrade. 1 2 3 4 Make sure that SW700M is powered on and connected to the same Wi-Fi network as your smartphone or tablet.
7 Product information WPS PBC (one button push) Yes General information Note •• Product information is subject to change without prior notice. AC power PHILIPS SWITCHING POWER SUPPLY Specifications Amplifier Rated Output Power Frequency Response Signal to Noise Ratio 2 x 2W RMS @ 10% THD 20 Hz - 20 kHz, ±3 dB > 85 dB Speakers Speaker Impedance Speaker Driver Sensitivity 8 ohm 66 mm full range 83dB/m/W Wireless Wireless standard Wireless security Frequency range 20 EN 802.
Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips. com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
9 Appendix: Understand meanings of LED colors 1 3 1 1 blinking green quickly 1 blinking green slowly 1 1 a 1 dimmed by 50% in solid green 1 c 1 blinking amber quickly, and 3 blinking green 1 solid green 1 solid red 1 1 blinking red 1 b 1 a System status indicator (on the front panel) 2 1 b SETUP indicator (on the back panel) c WPS indicator (on the back panel) LED colors No light 1 blinking amber slowly 1 blinking amber quickly 1 1 1 22 LED behavior 1 and 2 indicators in solid amb
2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. SW700M_UM_EN_05_V1.