User manual

The replacement reminder indicates that the

shaving heads need to be replaced.The

replacement reminder flashes when you switch the

shaver off.

1 Switch the shaver off.

2 Pull the shaving head holder off the bottom

part of the shaving unit.

3 Turn the retaining ring anticlockwise and lift it

off the shaving head.

Repeat this process for the other retaining rings.

Place them aside in a safe place.

4 Remove the shaving heads from the shaving

head holder.

Discard the used shaving heads immediately to

avoid mixing them with the new shaving heads.

5 Place the new shaving heads in the shaving

head holder.

Note: Make sure the notches on both sides of

the shaving heads fit exactly onto the

projections in the shaving head holder.

English